Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM A29/A29M-12 1.5.2012 náhled

Doplňující informace

ASTM A29/A29M-12

Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for

Automaticky přeložený název:

Standardní specifikace pro ocelové tyče, Carbon a Alloy , Hot - tepaný , obecné požadavky na

NORMA vydána dne 1.5.2012

Jazyk
Provedení	PDF - okamžité stažení - 1 939.50 Kč Tištěné - 1 939.50 Kč
Dostupnost	SKLADEM
Cena	1 939.50 Kč bez DPH
1 939.50 Kč

Informace o normě:

Označení normy: ASTM A29/A29M-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2012
Kód zboží: NS-1902
Počet stran: 16
Přibližná hmotnost: 48 g (0.11 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A29/A29M-12 :

Keywords:
alloy steel bars, carbon steel bars, cold finished steel bars, general delivery requirements, hot wrought steel bars, steel bars, Carbon steel bars/shapes--specifications, Cold-finished steel bars--specifications, General delivery requirements--steel, Hot wrought steel bars--specifications, Steel bars--specifications, Alloy steel bars--specifications, ICS Number Code 77.140.60 (Steel bars and rods)

Doplňující informace

1. Scope

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof):

Title of Specification	ASTM Designation^A
Hot-Rolled Carbon Steel Bars:
Steel Bars, Carbon, Quenched and Tempered	A321
Steel Bars and Shapes, Carbon Rolled from “T'' Rails	A499
Steel Bars, Carbon, Merchant Quality, M-Grades	A575
Steel Bars, Carbon, Hot-Wrought, Special Quality	A576
Steel Bars, Carbon, Merchant Quality, Mechanical Properties	A663/A663M
Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties	A675/A675M
Steel Bars for Springs, Carbon and Alloy	A689
Cold-Finished Carbon Steel Bars:
Steel Bars, Carbon and Alloy, Cold-Finished	A108
Cold-Drawn Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements	A311/A311M
Hot-Rolled Alloy Steel Bars:
Steel Bars, Alloy, Standard Grades	A322
Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements	A304
Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered	A434
Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both	A739
Cold-Finished Alloy Steel Bars:
Steel Bars, Alloy, Hot-Rolled or Cold-Finished, Quenched and Tempered	A434
Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components	A696

^A These designations refer to the latest issue of the respective specifications, which appear either in the Annual Book of ASTM Standards, Vol 01.05, or as reprints obtainable from ASTM.

1.2 In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named.

1.3 The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.4 For purposes of determining conformance to this specification and the various material specifications referenced in 1.1, dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E29.

Note 1—Specification A29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A108.

2. Referenced Documents

A322-13(2018)e1	Standard Specification for Steel Bars, Alloy, Standard Grades (Includes all amendments and changes 5/7/2020).
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A311/A311M-04(2020)	Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A304-20	Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A108-24	Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
A321-90(2001)	Standard Specification for Steel Bars, Carbon, Quenched and Tempered (Withdrawn 2007)
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A739-90a(2022)	Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both (Includes all amendments and changes 3/7/2022).
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A696-17(2022)	Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A663/A663M-23	Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A675/A675M-14(2019)	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A576-23	Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A575-20	Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A499-15(2020)	Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A434/A434M-18	Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A689-97(2018)	Standard Specification for Carbon and Alloy Steel Bars for Springs

Doporučujeme:

EviNor - Řízení a aktualizace českých norem

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.