Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A27/A27M-13(2016)
Standard Specification for Steel Castings, Carbon, for General Application
Přeložit název
NORMA vydána dne 1.9.2016
Informace o normě:
Označení normy: ASTM A27/A27M-13(2016)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2016
Kód zboží: NS-650662
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A27/A27M-13(2016) :
Keywords:
castings, general application, steel,, ICS Number Code 77.140.80 (Iron and steel castings)
Doplňující informace
| 1. Scope | ||||||||
|
1.1 This specification covers carbon steel castings for general applications that require up to 70 ksi (485 MPa) minimum tensile strength. Note 1: The grades covered by this specification represent
materials that are suitable for assembly with other steel castings
or wrought steel parts by fusion welding. It is not intended to
imply that all these grades possess the same degree of weldability
or that the same welding techniques can be used on all castings. It
is the responsibility of the purchaser to establish for himself a
suitable welding technique.
1.2 Several grades and two classes of steel castings are covered, as indicated below. The grade and class desired shall be specified by the purchaser. 1.2.1 Grade N-1—Chemical analysis only. 1.2.2 Grade N-2—Heat-treated but not mechanically tested. 1.2.3 Grade U-60-30 [415-205]—Mechanically tested but not heat-treated. 1.2.4 Grades 60-30 [415-205], 65-35 [450-240], 70-36 [485-250], and 70-40 [485-275]—Heat-treated and mechanically tested. 1.2.5 Class 1 and Class 2 steel castings shall be specified in accordance with 9.2. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||
| 2. Referenced Documents | ||||||||
|
Doporučujeme:
