Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
Automaticky přeložený název:
Standard Specification pro Electric-Resistance svařované feritické legované oceli kotlů a trubkových hadů
NORMA vydána dne 1.10.2014
Označení normy: ASTM A250/A250M-05(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2014
Kód zboží: NS-1764
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
boiler tube, resistance welded steel tube, steel tube, alloy, superheater tube, welded steel tube, ICS Number Code 23.040.10 (Iron and steel pipes)
1. Scope | ||||||
1.1 This specification2 covers several grades, designated T1, T1a, T1b, T2, T11, T12 and T22, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and chromium-molybdenum alloy-steel, boiler and superheater tubes. 1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/2 to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.320 in. [0.9 to 8.1 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. 1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness. 1.4 An optional supplementary requirement is provided for non-destructive examination for certain ASME applications. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5.1 Within the text, the SI units are shown in brackets. 1.5.2 The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.7.2014
Historická
1.3.2012
Historická
1.3.2012
Historická
1.3.2012
Historická
1.9.2012
Historická
1.4.2010
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 15.05.2024 (Počet položek: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.