Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for High-Strength Low-Alloy Structural Steel
Automaticky přeložený název:
Standard Specification pro vysoce pevnostní Low-Alloy konstrukční ocel
NORMA vydána dne 1.5.2013
Označení normy: ASTM A242/A242M-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-1740
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
atmospheric corrosion resistance, bars, bolted construction, durability, high-strength, low-alloy, plates, riveted construction, shapes, steel, structural steel, weight, welded construction, ICS Number Code 77.140.10 (Heat-treatable steels)
1. Scope | ||||
1.1 This specification covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction intended primarily for use as structural members where savings in weight [mass] or added durability are important. The atmospheric corrosion resistance of the steel in most environments is substantially better than that of carbon structural steels with or without copper addition. When properly exposed to the atmosphere, this steel can be used bare (unpainted) for many applications (see Note 1). This specification is limited to material up to 4 in. [100 mm], inclusive, in thickness. 1.2 When the steel is to be welded,
it is presupposed that a welding procedure suitable for the grade
of steel and intended use or service will be utilized. See Appendix
X3 of Specification A6/A6M for information on weldability.
1.3 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.4 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply. |
||||
2. Referenced Documents | ||||
|
Historická
1.4.2010
Historická
1.3.2012
Historická
1.10.2008
Historická
1.10.2010
Historická
1.10.2013
Historická
1.10.2009
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 19.05.2024 (Počet položek: 2 902 277)
© Copyright 2024 NORMSERVIS s.r.o.