Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A202/A202M-03
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon (Withdrawn 2004)
Automaticky přeložený název:
Standardní specifikace pro tlakové nádoby Desky, legované oceli , chrom - mangan - Silicon (Withdrawn 2004 )
NORMA vydána dne 10.9.2003
Informace o normě:
Označení normy: ASTM A202/A202M-03
Poznámka: NEPLATNÁ
Datum vydání normy: 10.9.2003
Kód zboží: NS-1567
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A202/A202M-03 :
Keywords:
chromium, chromium-manganese-silcon, steel plates
Doplňující informace
| 1. Scope | ||||||
|
1.1 This specification covers chromium-manganese-silicon alloy steel plates, intended particularly for welded boilers and other pressure vessels. 1.2 Plates under this specification are available in two grades having strength levels as follows:
1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification to 2 in. [50 mm]. 1.4 Grade A is suitable for rivets and when so used the bars shall be subject to the requirements for rolled bars specified in Specification A 31, except for the chemical and mechanical requirements. 1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents. Therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification. |
||||||
Doporučujeme:
