Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM A182/A182M-02

Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

Automaticky přeložený název:

Standardní specifikace pro kované nebo vrácena legované oceli potrubní příruby , kování Kování a ventily a náhradní díly pro High- Provozní teplota

NORMA vydána dne 10.9.2002

Jazyk
Provedení	Online zabezpečené PDF - 2 019.70 Kč Tištěné - 2 019.70 Kč
Dostupnost	SKLADEM
Cena	2019.70 Kč bez DPH
2 019.70 Kč

Informace o normě:

Označení normy: ASTM A182/A182M-02
Poznámka: NEPLATNÁ
Datum vydání normy: 10.9.2002
Kód zboží: NS-1439
Počet stran: 15
Přibližná hmotnost: 45 g (0.10 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A182/A182M-02 :

Keywords:

austenitic stainless steel, chromium alloy steel, chromium-molybdenum steel, ferritic/austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, nickel alloy steel, notch toughness requirements, pipe fittings, steel, piping applications, pressure containing parts, stainless steel fittings, stainless steel forgings, steel flanges, steel forgings, alloy, steel valves, temperature service applications, elevated, temperature service applications, high, wrought material

Doplňující informace

1. Scope

1.1 This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves, and similar parts to specified dimensions or to dimensional standards such as the ASME specifications that are referenced in Section 2.

1.2 For bars and products machined directly from bar, refer to Specifications A479/A479M and A739, for the similar grades available in those specifications. Products made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. For larger products and products for other applications, refer to Specification A 336 for the similar grades available in that specification.

1.3 Several grades of low alloy steels and ferritic, martensitic, austenitic, and ferritic-austenitic stainless steels are included in this specification. Selection will depend upon design and service requirements.

1.4 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.

1.5 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable" M" specification designation (SI units), the material shall be furnished to inch-pound units.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

2. Referenced Documents

A965/A965M-26	Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A788/A788M-26a	Standard Specification for Steel Forgings, General Requirements (Includes all amendments and changes 8/6/2026).
A763-15(2025)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A923-25	Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
A739-90a(2022)	Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both (Includes all amendments and changes 3/7/2022).
A484/A484M-24b	Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings (Includes all amendments and changes 9/5/2024).
A388/A388M-26	Standard Practice for Ultrasonic Examination of Steel Forgings
A336/A336M-23	Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A275/A275M-23	Standard Practice for Magnetic Particle Examination of Steel Forgings
E340-23	Standard Practice for Macroetching Metals and Alloys
E165-09	Standard Practice for Liquid Penetrant Examination for General Industry
E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
A1084-15a(2022)	Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels (Includes all amendments and changes 6/8/2022).
A1049/A1049M-18(2023)	Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A961/A961M-25a	Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications (Includes all amendments and changes 9/24/2025).


E112-25	Standard Test Methods for Determining Average Grain Size
A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A479/A479M-25	Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.