ASTM A1083/A1083M-23

Kategorie - podobné normy:

Výrobky z ploché oceli a polotovary

Anotace textu normy ASTM A1083/A1083M-23 :

This specification covers cold-rolled, carbon, structural, and high-strength low-alloy, in coils and cut lengths produced by the twin-roll casting process. Cold-rolled steel sheet is available in the following designations: commercial steel, drawing steel, structural steel, and high-strength low-alloy steel. Sheet steel grades defined by this specification are suitable for welding if appropriate welding conditions are selected. For certain welding processes, if more restrictive composition limits are desirable, they shall be specified at the time of inquiry and confirmed at the time of ordering. The material shall be capable of being bent, at room temperature, in any direction through 180? flat on itself without cracking on the outside of the bent portion. Two tension tests shall be made from each heat or from each 50 tons [45,000 kg]. Yield strength shall be determined by either the 0.2 % offset method or the 0.5 % extension under load method unless otherwise specified.

Keywords:

carbon steel sheet, cold-rolled steel sheet, commercial steel, drawing steel, high-strength low-alloy steel, steel sheet, structural steel,, ICS Number Code 77.140.50 (Flat steel products and semi-products)