Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A1058-12b
Standard Test Methods for Mechanical Testing of Steel Products´Metric (Includes all amendments And changes 6/23/2014).
Automaticky přeložený název:
Standardní Zkušební metody pro mechanické testování Steel Products'Metric
NORMA vydána dne 1.11.2012
Informace o normě:
Označení normy: ASTM A1058-12b
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-1243
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A1058-12b :
Keywords:
bend test, Brinell hardness, Charpy impact test, elongation, hardness test, portable hardness, reduction of area, Rockwell hardness, tensile strength, tension test, yield strength, ICS Number Code 77.040.10 (Mechanical testing of metals)
Doplňující informace
| 1. Scope | |||||
|
1.1 These test methods cover mechanical tests described in ASTM, EN,2 ISO,1.2 These test methods cover procedures for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control. 1.3 Only one of the testing procedure tracks shall be followed: ASTM, EN, ISO, or JIS. When a test method or practice is not available in one of the tracks then an appropriate test method or practice from an alternative track shall be used. The respective tests are listed in the column shown in Test |
Sections |
ASTM |
EN |
ISO |
JIS |
|
Tension |
E8/E8M |
10002-1 |
6892-1 |
Z 2241 |
|
|
Bend |
13 |
E190 |
7438A |
7438 |
Z 2248 |
|
|
|
E290 |
|
|
|
|
Bend (tube) |
13 |
… |
10232 |
8491 |
… |
|
Hardness |
14 |
|
|
|
|
|
Brinell |
15 |
E10 |
6506-1A |
6506-1 |
Z 2243 |
|
Rockwell |
16 |
E18 |
6508-1A |
6508-1 |
Z 2245 |
|
Portable |
17 |
A833 |
… |
… |
… |
|
|
|
E110 |
|
|
|
|
|
|
A1038 |
|
|
|
|
Impact |
18 to 26 |
E23 |
148-1A |
148-1 |
Z 2242 |
|
Keywords |
27 |
… |
… |
… |
… |
1.4 The values stated in SI units
are to be regarded as standard. No other units of measurement are
included in this standard.
1.5 Attention is directed to Practice ISO 17025 when there may be a need for information on criteria for evaluation of testing laboratories.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
|
|
Standard Test Method for Guided Bend Test for Ductility of Welds |
|
|
Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
|
|
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Test Method for Brinell Hardness of Metallic Materials |
|
|
Standard Test Method for Leeb Hardness Testing of Steel Products |
|
|
Standard Test Methods for Bend Testing of Material for Ductility |
|
|
Standard Test Methods for Rockwell Hardness of Metallic Materials |
|
|
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
Doporučujeme:
