Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B111/B111M-08a 1.10.2008 náhled

Doplňující informace

ASTM B111/B111M-08a

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock (Includes all amendments And changes 12/31/2010).

Automaticky přeložený název:

Standardní specifikace pro mědi a měděných slitin bezešvých trubek kondenzátoru a dutinkou skladě

NORMA vydána dne 1.10.2008

Jazyk
Provedení	PDF - okamžité stažení - 1 948.00 Kč Tištěné - 1 948.00 Kč
Dostupnost	SKLADEM
Cena	1 948.00 Kč bez DPH
1 948.00 Kč

Informace o normě:

Označení normy: ASTM B111/B111M-08a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2008
Kód zboží: NS-5354
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM B111/B111M-08a :

Keywords:
condenser tube, copper, copper alloys, evaporator, ferrule stock, heat exchanger, seamless tube , UNS No. C10100, UNS No. C10200, UNS No. C10300, UNS No. C10800, UNS No. C12000, UNS No. C12200, UNS No. C14200, UNS No. C19200, UNS No. C23000, UNS No. C28000, UNS No. C44300, UNS No. C44400, UNS No. C44500, UNS No. C60800, UNS No. C61300, UNS No. C61400, UNS No. C68700, UNS No. C70400, UNS No. C70600, UNS No. C70620, UNS No. C71000, UNS No. C71500, UNS No. C71520, UNS No. C71640, UNS No. C72200

Doplňující informace

1. Scope

1.1 This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3¹/₈ in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified: (Warning—Mercury is a definite health hazard in use and disposal. (See 12.1.))

Copper or Copper Alloy UNS No.	Previously Used Designation	Description

C10100	OFE	Oxygen-free electronic
C10200	OF^A	Oxygen-free without residual deoxidants
C10300	. . .	Oxygen-free, extra low phosphorus
C10800	. . .	Oxygen-free, low phosphorus
C12000	DLP^A	Phosphorized, low residual phosphorus
C12200	DHP^A	Phosphorized, high residual phosphorus
C14200	DPA^A	Phosphorized, arsenical
C19200	. . .	Phosphorized, 1 % iron
C23000	. . .	Red Brass
C28000	. . .	Muntz Metal
C44300	. . .	Admiralty Metals, B, C, and D
C44400
C44500
C60800	. . .	Aluminum Bronze
C61300	. . .	. . .
C61400	. . .	Aluminum Bronze, D
C68700	. . .	Aluminum Brass, B
C70400	. . .	95-5 Copper-Nickel
C70600	. . .	90-10 Copper-Nickel
C70620	. . .	90-10 Copper-Nickel—Welding Grade
C71000	. . .	80-20 Copper-Nickel
C71500	. . .	70-30 Copper-Nickel
C71520	. . .	70-30 Copper-Nickel—Welding Grade
C71640	. . .	Copper-nickel-iron-manganese
C72200	. . .	. . .

^A Designations listed in Classification B 224.

1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 The following safety hazards caveat pertains only to the test methods portion, Section 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E118-89(1996)	Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E76-88(1998)	Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
E75-76(1996)	Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E54-80(1996)	Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E2575-19	Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E255-23	Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
B968/B968M-16(2022)	Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
B153-22	Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
B858-06(2018)	Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).
B224-16(2022)	Standard Classification of Coppers
B170-99(2020)	Standard Specification for Oxygen-Free Electrolytic Copper´Refinery Shapes
E243-18	Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
B154-16(2022)	Standard Test Method for Mercurous Nitrate Test for Copper Alloys
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.