NORMSERVIS s.r.o.

ČSN ETSI EN 302561-V1.3.2 (875142)

Elektromagnetická kompatibilita a rádiové spektrum (ERM) - Pozemní pohyblivá služba - Rádiová zařízení používající modulaci s konstantní nebo proměnnou obálkou, pracující v šířce pásma kanálu 25 kHz, 50 kHz, 100 kHz nebo 150 kHz - Harmonizovaná EN pokrývající základní požadavky článku 3.2 Směrnice R&TTE (Norma k přímému použití jako ČSN).

NORMA vydána dne 1.3.2015

Anglicky -
Tištěné (593.00 CZK)

The information about the standard:

Designation standards: ČSN ETSI EN 302561-V1.3.2
Classification mark: 875142
Catalog number: 96812
Publication date standards: 1.3.2015
The number of pages: 72
Approximate weight : 216 g (0.48 lbs)
Country: Czech technical standard
Kategorie: Technické normy ČSN

Annotation of standard text ČSN ETSI EN 302561-V1.3.2 (875142):

V1.3.2 The present document covers the technical requirements for radio transmitters and receivers used in stations and technical requirements for TMO repeater in the Private Mobile Radio (PMR) service. It applies to use in the land mobile service, operating on radio frequencies between 30 MHz and 3 GHz, with channel separations of 25 kHz, 50 kHz, 100 kHz and 150 kHz. It applies to equipment for continuous and/or discontinuous transmission of data and/or digital speech. The equipment (base station and mobile station) comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder. The types of equipment covered by the present document are as follows: - base station (equipment fitted with an antenna connector, intended for use in a fixed location); - mobile station (equipment fitted with an antenna connector, normally used in a vehicle or as a transportable); - TMO Repeater; and - those hand portable stations: a) fitted with an antenna connector; or b) without an external antenna connector (integral antenna equipment), but fitted with a permanent internal or a temporary internal 50 Ohm Radio Frequency (RF) connector which allows access to the transmitter output and the receiver input. Hand portable equipment without an external or internal RF connector and without the possibility of having a temporary internal 50 Ohm RF connector is not covered by the present document. These specifications do not necessarily include all the characteristics which may be required by a user of equipment, nor do they necessarily represent the optimum performance achievable. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.4] (R&TTE Directive), which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.4] may apply to equipment within the scope of the present document