NORMSERVIS s.r.o.

ČSN ETSI EN 302065-3-V2.1.1 (875141)

Zařízení krátkého dosahu (SRD) používající technologii ultraširokého pásma (UWB) - Harmonizovaná norma pokrývající základní požadavky článku 3.2 Směrnice 2014/53/EU - Část 3: Požadavky na zařízení UWB pro pozemní vozidlové aplikace (Norma k přímému použití jako ČSN).

NORMA vydána dne 1.4.2017

Anglicky -
Tištěné (434.00 CZK)

The information about the standard:

Designation standards: ČSN ETSI EN 302065-3-V2.1.1
Classification mark: 875141
Catalog number: 501771
Publication date standards: 1.4.2017
The number of pages: 44
Approximate weight : 132 g (0.29 lbs)
Country: Czech technical standard
Kategorie: Technické normy ČSN

Annotation of standard text ČSN ETSI EN 302065-3-V2.1.1 (875141):

V2.1.1 The present document applies to transceivers, transmitters and receivers utilizing Ultra Wide Band (UWB) technologies and used for short range applications in road and rail vehicles, which includes devices mounted inside or at the surface. The present document applies to impulse, modified impulse and RF carrier based UWB technologies in the main operating frequency ranges from 3,1 GHz to 4,8 GHz or from 6 GHz to 9 GHz. Examples of applications for road and rail vehicles are: - stand-alone radio equipment with or without its own control provisions; - plug-in radio devices intended for use with, or within, a variety of host systems, e.g. personal computers, etc.; - plug-in radio devices intended for use within combined equipment, e.g. modems, access points, etc.; - equipment for telemetry communication inside and outside of road and rail vehicles; - equipment for the localization of devices inside and outside of road and rail vehicles (e.g. hand-held devices); - equipment to investigate materials (e.g. fuel). The present document does not apply to fixed road infrastructure installations. For fixed rail infrastructure tracking applications see ETSI TR 101 538 [i.10] and ETSI TS 103 085 [i.11]. NOTE: As per the ECC/DEC/(06)04 [i.2] and Decision 2014/702/EC [i.4] the UWB transmitter equipment conforming to the present document is not to be installed at a fixed outdoor location, for use in flying models, aircraft and other forms of aviation. The present document applies to UWB equipment with an output connection used with a dedicated antenna or UWB equipment with an integral antenna. Equipment covered by the present document operates in accordance with ECC/DEC(06)04 [i.2]. The present document does not apply to radio equipment for which a specific Harmonised EN applies as such. Harmonised EN may specify additional EN requirements relevant to the presumption of conformity under article 3.2 of the Radio Equipment Directive (Directive 2014/53/EU) [i.1]