NORMSERVIS s.r.o.

ČSN ETSI EN 301842-1-V1.4.1 (875110)

Rádiové zařízení datového spoje VHF (VDL) letadlo-země v režimu 4 - Technické vlastnosti a metody měření zařízení umístěného na zemském povrchu - Část 1: EN pro pozemní zařízení (Norma k přímému použití jako ČSN).

NORMA vydána dne 1.11.2015

Anglicky -
Tištěné (434.00 CZK)

The information about the standard:

Designation standards: ČSN ETSI EN 301842-1-V1.4.1
Classification mark: 875110
Catalog number: 98664
Publication date standards: 1.11.2015
The number of pages: 48
Approximate weight : 144 g (0.32 lbs)
Country: Czech technical standard
Kategorie: Technické normy ČSN

Annotation of standard text ČSN ETSI EN 301842-1-V1.4.1 (875110):

V1.4.1 The present document applies to the following radio equipment types: - Very High Frequency (VHF) Digital Link (VDL) Mode 4 ground-based radio transmitters and receivers for air-ground communications operating in the VHF band, using Gaussian-filtered Frequency Shift Keying (GFSK) Modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [2]. The present document provides part 1 of the technical specification. The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [2] and VDL Mode 4 Technical Manual (TM) [1]. Manufacturers should note that in future the tuning range for the ground transceivers may also cover any 25 kHz channel from 108,000 MHz to 111,975 MHz. The scope of the present document is limited to ground stations. The equivalent specification for airborne stations is ETSI EN 302 842 [i.1]. The present document is derived from the specifications: - VDL Mode 4 standards produced under the auspices of the International Civil Aviation Organization (ICAO) [1] and [2]; - other relevant standards as defined in clause 2. The present document deals with tests of the physical layer necessary to support all types of equipment