ČSN ETSI EN 300330-V2.1.1 (875026)

Annotation of standard text ČSN ETSI EN 300330-V2.1.1 (875026):

V2.1.1 The present document specifies technical characteristics and methods of measurements for the following Short Range Device major equipment types: 1) Generic Short range Devices including transmitters and receivers operating in the range from 9 kHz to 25 MHz; and 2) inductive loop transmitters and receivers operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID), Near Field Communication (NFC) and Electronic Article Surveillance (EAS) operating in LF and HF ranges. Also the present document covers fixed, mobile and portable stations. NOTE: If a system includes transponders, these are measured together with the transmitter. The frequency ranges and limits of the present document are based on the European Commission Decision for SRDs [i.10], CEPT/ERC/REC 70-03 [i.1]. When selecting parameters for new SRDs, which may have inherent safety of human life implications, manufacturers and users should pay particular attention to the potential for interference from other systems operating in the same or adjacent bands. The radio equipment, covered by the present document is divided into several classes which are dependent on the antenna used (see annex B). Three types of measuring methods are defined in the present document due to the varied nature of the antenna types for equipment used in this band. One method measures the RF carrier current, another measures the radiated H-field and the third conducted power. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.4] under the conditions identified in annex A