NORMSERVIS s.r.o.

ASTM D6210-17

Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

NORMA vydána dne 1.11.2017

Anglicky -
PDF - okamžité stažení (1253.50 CZK)

Anglicky -
PDF + redline - ihned (1504.20 CZK)

Anglicky -
Tištěné (1253.50 CZK)

Anglicky -
Tisk + redline (1504.20 CZK)


Proč Redline?

Redline představuje rychlý a snadný způsob jak porovnat všechny změny mezi aktuální platnou normou a předchozí verzí.

Díky redline se okamžitě dozvíte o:

Ušetřete si čas i starosti!

Díky Redline již nebudete muset ztrácet čas zjišťováním, co se v nové normě změnilo. Redline Vám ušetří čas a zaručí, že se o změnách v normě dozvíte.

Cena

Pokud si zvolíte možnost "Platná norma + Redline", pak dostanete oba dokumenty! A co je nejlepší, cena Platné normy + Redline je pouze o něco málo vyšší než cena samostatné platné normy.

Zobrazit ukázku Redline

Informace o normě:

Označení normy: ASTM D6210-17
Datum vydání normy: 1.11.2017
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Anotace textu normy ASTM D6210-17 :

This specification covers the requirements for fully-formulated glycol base coolants for cooling systems of heavy-duty engines. When concentrates are used at 40 to 60 % glycol concentration by volume in water of suitable quality, or when prediluted glycol base engine coolants (50 volume % minimum) are used without further dilution, they will function effectively during both winter and summer to provide protection against corrosion, cavitation, freezing, and boiling. The coolant concentrate mixed with water or the prediluted coolant, when maintained with maintenance doses of supplemental coolant additives (SCA), shall be suitable for use in a properly maintained cooling system in normal service for a minimum of two years. In addition, the coolant concentrate or prediluted coolant shall provide protection in operating engines against cavitation corrosion (also termed liner pitting) and against scaling of internal engine hot surfaces. Hot surfaces typically are within the engine head, head spacer, upper cylinder liner, or liquid cooled exhaust manifold.


Keywords:
cavitation, fully-formulated heavy-duty engine coolant, supplemental coolant additive maintenance dose,, ICS Number Code 71.100.45 (Refrigerants and antifreezes)