Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film (Includes all amendments and changes 6/24/2019).
NORMA vydána dne 1.5.2019
Designation standards: ASTM D3595-14(2019)e1
Publication date standards: 1.5.2019
The number of pages: 3
Approximate weight : 9 g (0.02 lbs)
Country: American technical standard
Kategorie: Technické normy ASTM
This specification covers four types of polychlorotrifluoroethylene extruded plastic sheet and film: Type I - a transparent film with high and low moisture vapor transmission rate; Type II - a dimensionally stable transparent sheet and film with low moisture vapor transmission rate; Type III - a dimensionally stable transparent film with very low moisture vapor transmission rate; and Type IV - a low crystalline transparent film with high ductility and extremely low moisture vapor transmission rate. The specimens shall be manufactured from polychlorotrifluoroethylene plastics that consist of at least 90% chlorotrifluoethylene and 10% chemical modification such as co-monomers but not colorants, fillers, plasticizers, or mechanical blends of other resins. Tests shall be conducted to determine the specific property values of the specimen which shall conform to the tensile strength, elongation, dimensional stability or shrinkage, and moisture vapor transmission rate requirements.
Keywords:
chlorofluorocarbon plastics, copolymer, extruded PCTFE, fluorocarbon polymer, fluoropolymers, homopolymer, PCTFE, PCTFE film, PCTFE sheet, polychlorotrifluoroethylene,, ICS Number Code 83.140.10 (Films and sheets)