NORMSERVIS s.r.o.

ASTM C476-23

Standard Specification for Grout for Masonry

NORMA vydána dne 1.2.2023

Anglicky -
PDF - okamžité stažení (1251.00 CZK)

Anglicky -
PDF + redline - ihned (1501.20 CZK)

Anglicky -
Tištěné (1251.00 CZK)

Anglicky -
Tisk + redline (1501.20 CZK)


Proč Redline?

Redline představuje rychlý a snadný způsob jak porovnat všechny změny mezi aktuální platnou normou a předchozí verzí.

Díky redline se okamžitě dozvíte o:

Ušetřete si čas i starosti!

Díky Redline již nebudete muset ztrácet čas zjišťováním, co se v nové normě změnilo. Redline Vám ušetří čas a zaručí, že se o změnách v normě dozvíte.

Cena

Pokud si zvolíte možnost "Platná norma + Redline", pak dostanete oba dokumenty! A co je nejlepší, cena Platné normy + Redline je pouze o něco málo vyšší než cena samostatné platné normy.

Zobrazit ukázku Redline

Informace o normě:

Označení normy: ASTM C476-23
Datum vydání normy: 1.2.2023
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Anotace textu normy ASTM C476-23 :

This specification covers two types of grout, fine and coarse grout, for use in the construction of masonry structures. Grout is specified by proportions or strength requirements. Materials used as ingredients in grout shall conform to the requirements specified such as: cementitious materials; blended cements; quicklime; hydrated lime; coal fly ash or raw calcine natural pozzolan; granulated blast furnace slag; air-entraining admixtures; aggregates; water; pumping aids; antifreeze compounds; and storage of materials. Fine grout shall be manufactured with fine aggregates. Coarse grout shall be manufactured with a combination of coarse and fine aggregates. Proportions of ingredients shall be determined by grout proportion requirements and by the specified compressive strength. Materials for grout shall be measured in such a way that the required proportions of the grout materials are controlled and accurately measured. Grout shall be produced using one of the following procedures: grout materials mixed with water at the job site and ready-mixed grout transported to the job site.


Keywords:
aggregates, cement, compressive strength, grout, masonry, portland cement, proportions , self-consolidating grout,, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)