Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
NORMA vydána dne 1.11.2023
Designation standards: ASTM A1008/A1008M-23e1
Publication date standards: 1.11.2023
The number of pages: 12
Approximate weight : 36 g (0.08 lbs)
Country: American technical standard
Kategorie: Technické normy ASTM
This specification covers cold-rolled, carbon steel sheets, in coils and cut lengths, in the following designations: commercial steels (CS Types A, B, and C); drawing steel (DS Types A and B); deep drawing steel (DDS); extra deep drawing steel (EDDS); structural steel (SS Grades 25[170], 30[205], 33[230] Types 1 and 2, 40[275] Types 1 and 2, 50[340], 60[410], 70[480], and 80[550]); high-strength low-alloy steel (HSLAS Classes 1 and 2 of Grades 45[310], 50[340]. 55[380], 60[410], 65[450], and 70[480]), high-strength low-alloy steel with improved formability (HSLAS-F Grades 50[340], 60[410], 70[480], and 80[550]); solution hardened steel (SHS); and bake hardenable steel (BHS). Conformance of the steel sheets to chemical composition requirements shall be tested by heat analysis. Specimens shall also undergo tension and bending tests and shall conform to specified values of tensile and yield strength, elongation, and bake hardening index. Unless otherwise indicated, sheet surfaces shall have a matte finish and shall be oiled.
Keywords:
bake hardenable steel, bake hardening index, carbon steel sheet, cold-rolled steel sheet, commercial steel, deep drawing steel, drawing steel, extra deep drawing steel, full hard steel, high-strength low-alloy steel, high-strength low-alloy steel with improved formability, required hardness steel, solution hardened steel, special forming steel, steel sheet, structural steel,, ICS Number Code 77.140.01 (Iron and steel products in general)