NORMSERVIS s.r.o.

ASTM A753-21

Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

NORMA vydána dne 1.2.2021

Anglicky -
PDF - okamžité stažení (1584.40 CZK)

Anglicky -
PDF + redline - ihned (1901.30 CZK)

Anglicky -
Tištěné (1584.40 CZK)

Anglicky -
Tisk + redline (1901.30 CZK)


Proč Redline?

Redline představuje rychlý a snadný způsob jak porovnat všechny změny mezi aktuální platnou normou a předchozí verzí.

Díky redline se okamžitě dozvíte o:

Ušetřete si čas i starosti!

Díky Redline již nebudete muset ztrácet čas zjišťováním, co se v nové normě změnilo. Redline Vám ušetří čas a zaručí, že se o změnách v normě dozvíte.

Cena

Pokud si zvolíte možnost "Platná norma + Redline", pak dostanete oba dokumenty! A co je nejlepší, cena Platné normy + Redline je pouze o něco málo vyšší než cena samostatné platné normy.

Zobrazit ukázku Redline

Informace o normě:

Označení normy: ASTM A753-21
Datum vydání normy: 1.2.2021
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Anotace textu normy ASTM A753-21 :

This specification covers commonly used wrought nickel-iron soft magnetic alloys produced or supplied expressly for use in magnetic cores and other parts requiring high magnetic permeability, high electrical resistivity, low coercive field strength, and low core loss. Four specific alloy types are covered such as Alloy Type 1, 2, 3, and 4. Alloy Type 2 in thin-strip form is available two different grades. Grade 1 is semi-isotropic and is recommended for use in transformer laminations. Grade 2 is isotropic and is recommended for use inn rotating machinery laminations. These materials are capable of being produced in a wide variety of forms and conditions such as forging billet, hot-rolled plate, strip, and bar, cold-finished bars, cold-rolled sheep and strip, shaped bar and wire. The alloys shall conform to the required chemical composition for carbon, manganese, silicon, phosphorus, sulfur, chromium, nickel, molybdenum, cobalt, copper, and iron. Dc magnetic testing shall be the only magnetic test methods used for all product forma and sizes other than thin strip and sheet measuring magnetic permeability and coercive field strength. The physical properties of annealed alloy such as electrical resistivity, saturation induction, density, Curie temperature and mean linear coefficient of expansion shall be measured. Mechanical properties of cold-rolled hard temper strip such as yiled strength, ultimated tensile strength, elongation,and hardness.


Keywords:
bars, billet, nickel-iron, permeability, plates, sheets, strips, wires,, ICS Number Code 77.120.40 (Nickel, chromium and their alloys)