Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 15.08 - Sensory Evaluation; Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Homeland Security Applications
ASTM Volume 15.08 - Sensory Evaluation; Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Homeland Security Applications
Přeložit název
PUBLIKACE vydána dne 1.11.2019
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 15.08 - Sensory Evaluation; Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Homeland Security Applications
Počet stran: 1284
Přibližná hmotnost: 3883 g (8.56 liber)
Datum vydání: 1.11.2019
Země: Americká publikace
Anotace textu normy :
Security Systems and Equipment—standards focus on protective design of buildings, including blast and forced entry resistant glazing, blast resistant doors, vehicle crash testing of perimeter barriers, and boat barrier perimeters. Test methods and practices also cover controlled access security screening equipment, as well as locking devices. Detention and Correctional Facilities—covers security control systems and detention hardware, including hinges and locks, furnishings, and physical barriers, including swinging door assemblies and chain link barrier systems.Homeland Security Applications—standards address CBRNE sensors and detectors, emergency preparedness, training procedures, decontamination, personal protective equipment, building and infrastructure protection, security controls, operational equipment, and terminology.Automatic Guided Industrial VehiclesExoskeletons and Exosuits
Table of Contents
| A627-03(2019) | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities |
| E2458-17 | Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces |
| E2520-15 | Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors |
| E2521-16 | Standard Terminology for Evaluating Response Robot Capabilities |
| E2542-08(2014) | Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations |
| E2543-08(2014) | Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters |
| E2566-17a | Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity |
| E2592-16 | Standard Practice for Evaluating Response Robot Capabilities: Logistics: Packaging for Urban Search and Rescue Task Force Equipment Caches |
| E2601-15 | Standard Practice for Radiological Emergency Response |
| E2639-12(2018) | Standard Test Method for Blast Resistance of Trash Receptacles |
| E2677-14 | Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors |
| E2732-11 | Standard Practice for Responder Family Support Service |
| E2740-12(2018) | Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing |
| E2770-17 | Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins |
| E2771-11(2019) | Standard Terminology for Homeland Security Applications |
| E2800-11(2017) | Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials |
| E2801-11(2020) | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps |
| E2802-11(2020) | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Hurdles |
| E2803-11(2020) | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Inclined Planes |
| E2804-11(2020) | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings |
| E2805-18 | Standard Practice for Measurement of the Biological Activity of Ricin |
| E2826-11 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps |
| E2827-11 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Crossing Pitch/Roll Ramps |
| E2828-11 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields |
| E2829-11(2020) | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed |
| E2830-11(2020) | Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds |
| E2831/E2831M-11(2018) | Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places |
| E2842-14 | Standard Guide for Credentialing for Access to an Incident or Event Site |
| E2851/E2851M-13 | Standard Specification for Ruggedness Requirements for HAZMAT Instrumentation |
| E2852-13 | Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation |
| E2853-12 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Human-System Interaction (HSI): Search Tasks: Random Mazes with Complex Terrain |
| E2854-12 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range |
| E2855-12 | Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range |
| E2885-13 | Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications |
| E2915-13(2020) | Standard Guide for Emergency Operations Center (EOC) Management |
| E2933-13 | Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications |
| E2950-14(2020) | Standard Specification for Metal Canopy Systems |
| E2951-13(2020)e1 | Standard Guide for Community Emergency Preparedness for Persons with Disabilities |
| E2952-17 | Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED) |
| E2991/E2991M-17 | Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain |
| E2992/E2992M-17 | Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain |
| E3002-15 | Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin |
| E3003-15 | Standard Practice for Body Armor Wearer Measurement and Fitting of Armor |
| E3004-15e1 | Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor |
| E3005-18 | Standard Terminology for Body Armor |
| E3062/E3062M-19 | Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items |
| E3068-17e1 | Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing |
| E3078/E3078M-19 | Standard Practice for Conditioning of Hard Armor Test Items |
| E3086-17 | Standard Practice for Creating Appliques for Use in Testing of Nonplanar Soft Body Armor Designed for Females |
| E3095-17 | Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies |
| E3107/E3107M-19 | Standard Test Method for Resistance to Penetration and Backface Deformation for Ballistic-resistant Torso Body Armor and Shoot Packs |
| E3108-18 | Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers |
| E3109-18 | Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers |
| E3110/E3110M-19 | Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs |
| E3111/E3111M-18 | Standard Test Method for Ballistic Resistant Head Protection |
| E3112/E3112M-19 | Standard Test Method for Ballistic-resistant Products and Shoot Packs |
| E3113-18 | Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies |
| E3131-17 | Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders |
| E3132/E3132M-17 | Standard Practice for Evaluating Response Robot Logistics: System Configuration |
| E3141/E3141M-18 | Standard Test Method for Ballistic Resistant Shields for Law Enforcement |
| E3187/E3187M-19 | Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers |
| E3192/E3192M-19 | Standard Practice for Soft Armor Conditioning by Tumbling |
| E3195-19 | Standard Guide for Body Armor Program Management |
| E3212-19 | Standard Guide for Selection and Procurement of Protective Gloves Worn by Law Enforcement and Corrections |
| E3215-19a | Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers |
| F476-14 | Standard Test Methods for Security of Swinging Door Assemblies |
| F571-87(2016) | Standard Practice for Installation of Exit Devices in Security Areas |
| F792-17e1 | Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
| F832-90(2016) | Standard Classification for Security Seals |
| F883-13 | Standard Performance Specification for Padlocks |
| F946-85(2018) | Standard Guide for Establishing Security Seal Control and Accountability Procedures |
| F967-03(2018) | Standard Practice for Security Engineering Symbols |
| F1090-15 | Standard Classification for Bank and Mercantile Vault Construction |
| F1157-04(2015) | Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals |
| F1158-94(2015) | Standard Guide for Inspection and Evaluation of Tampering of Security Seals |
| F1233-08(2019) | Standard Test Method for Security Glazing Materials And Systems |
| F1247-89(2018) | Standard Specification for Intrusion Resistant Generic Vault Structures |
| F1448-16 | Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents |
| F1450-12a(2019) | Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities |
| F1468-04a(2018) | Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening |
| F1534-16 | Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching |
| F1550-16 | Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter |
| F1577-05(2019) | Standard Test Methods for Detention Locks for Swinging Doors |
| F1592-12(2019) | Standard Test Methods for Detention Hollow Metal Vision Systems |
| F1642/F1642M-17 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| F1643-05(2019) | Standard Test Methods for Detention Sliding Door Locking Device Assembly |
| F1699-96(2016) | Standard Classification for Passive Fiber Optic Seals |
| F1758-05(2019) | Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors |
| F1870-16 | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| F1915-05(2019) | Standard Test Methods for Glazing for Detention Facilities |
| F2155-01(2017) | Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals |
| F2247-18 | Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method) |
| F2248-19 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
| F2322-12(2019) | Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities |
| F2348-04(2017) | Standard Performance Specification for Privacy Padlocks |
| F2401-16 | Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices |
| F2542-05(2019) | Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities |
| F2656/F2656M-18a | Standard Test Method for Crash Testing of Vehicle Security Barriers |
| F2697-15 | Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities |
| F2766-11(2015) | Standard Test Method for Boat Barriers |
| F2912-17 | Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings |
| F2927-12 | Standard Test Method for Door Systems Subject to Airblast Loadings |
| F2956-16 | Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems |
| F3006-19 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| F3007-19 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
| F3016/F3016M-19 | Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds |
| F3020-19a | Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security |
| F3038-14 | Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems |
| F3057-16 | Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings |
| F3200-18a | Standard Terminology for Driverless Automatic Guided Industrial Vehicles |
| F3217-17 | Standard Guide for Security Fasteners |
| F3218-17 | Standard Practice for Recording Environmental Effects for Utilization with A-UGV Test Methods |
| F3244-17 | Standard Test Method for Navigation: Defined Area |
| F3265-17 | Standard Test Method for Grid-Video Obstacle Measurement |
| F3277-19 | Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities |
| F3278-19a | Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security |
| F3296-19 | Standard Practice for Commercial Application of Electric Security Fences |
| F3297-19 | Standard Practice for Corrections Application for Non-Lethal Electric Security Fences |
| F3323-19 | Standard Terminology for Exoskeletons and Exosuits |
| F3327-18 | Standard Practice for Recording the A-UGV Test Configuration |
| F3356-19a | Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security |
| F3358-18 | Standard Practice for Labeling and Information for Exoskeletons |
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
