Publikace  ASTM Volume 08.02 - Plastics (II): D3222 - D5083 1.6.2019 náhled

ASTM Volume 08.02 - Plastics (II): D3222 - D5083

ASTM Volume 08.02 - Plastics (II): D3222 - D5083

Přeložit název

PUBLIKACE vydána dne 1.6.2019


Jazyk
Provedení
Dostupnostdo 7 pracovních dnů
Cena7 317.50 bez DPH
7 317.50

Informace o produktu:

Označení: ASTM Volume 08.02 - Plastics (II): D3222 - D5083
Počet stran: 934
Přibližná hmotnost: 2833 g (6.25 liber)
Datum vydání: 1.6.2019
Země: Americká publikace
Kategorie: ASTM Section 08 - Plastics

Anotace textu normy :

These three volumes, 08.01 through 08.03, feature over 480 plastics-related standards, including test methods that establish standard procedures for assessing physical, mechanical, optical, permanence, and thermal properties.Volume 08.03 also covers:



Plastic Building Products—standards deal with plastic siding products, glass-fiber-reinforced polyester plastic panels, and PVC building products.



Reinforced Plastic Piping Systems and Chemical Equipment—covers testing requirements for glass-fiber-reinforced thermosetting resin pipes, fittings, and joints; and establish chemical resistance of thermosetting resins.


Table of Contents



D3222-18a   Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
D3275-18   Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
D3291-11(2016)e1   Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
D3294-15   Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
D3295-15   Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
D3296-14a(2019)   Standard Specification for FEP-Fluorocarbon Tube
D3307-16   Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
D3308-12(2017)   Standard Specification for PTFE Resin Skived Tape
D3350-14   Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
D3354-15   Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
D3364-99(2019)   Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
D3367-13   Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
D3368-17   Standard Specification for FEP Sheet and Film
D3418-15   Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
D3419-12(2019)   Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
D3420-14   Standard Test Method for Pendulum Impact Resistance of Plastic Film
D3453-12   Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
D3465-14   Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
D3489-17   Standard Test Methods for Microcellular Urethane Materials
D3574-17   Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
D3575-14   Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
D3576-15   Standard Test Method for Cell Size of Rigid Cellular Plastics
D3591-17   Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
D3594-93(2013)   Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
D3595-14(2019)e1   Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
D3596-19   Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
D3641-15   Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
D3647-16   Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
D3675-17   Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
D3676-18   Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
D3748-14(2019)   Standard Practice for Evaluating High-Density Rigid Cellular Plastics
D3749-19   Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
D3763-18   Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D3768-16   Standard Test Method for Microcellular Urethanes—Flexural Recovery
D3769-15   Standard Test Method for Microcellular Urethanes—High-Temperature Sag
D3795-00a(2012)   Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
D3801-19   Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3826-18   Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
D3835-16   Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
D3846-08(2015)   Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
D3851-17   Standard Specification for Microcellular Polyurethane Shoe Soling Materials
D3892-15   Standard Practice for Packaging/Packing of Plastics
D3895-19   Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D3914-02(2016)   Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
D3916-08(2016)   Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D3917-15a   Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
D3918-11   Standard Terminology Relating to Reinforced Plastic Pultruded Products
D3935-15   Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
D3965-16   Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3981-09a(2016)   Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
D4000-16   Standard Classification System for Specifying Plastic Materials
D4001-13   Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
D4065-12   Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D4066-13   Standard Classification System for Nylon Injection and Extrusion Materials (PA)
D4067-16   Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
D4092-07(2013)   Standard Terminology for Plastics: Dynamic Mechanical Properties
D4093-95(2014)   Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
D4101-17e1   Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
D4203-17   Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D4204-16   Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D4216-17   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
D4218-15   Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
D4272/D4272M-15   Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
D4273-18   Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
D4274-16   Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
D4275-17   Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
D4321-15   Standard Test Method for Package Yield of Plastic Film
D4329-13   Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
D4349-16   Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
D4350-16   Standard Test Method for Corrosivity Index of Plastics and Fillers
D4364-13   Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
D4385-13   Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
D4396-15   Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
D4397-16   Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
D4440-15   Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
D4441-15   Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
D4443-19   Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
D4459-12   Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
D4473-08(2016)   Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
D4475-02(2016)   Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
D4476/D4476M-14   Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
D4526-12   Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
D4549-15   Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
D4591-17   Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
D4603-18   Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
D4634-16   Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
D4635-16   Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
D4659-14   Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
D4660-18   Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
D4661-18   Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
D4662-15   Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
D4663-15   Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
D4669-18   Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
D4670-17   Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols
D4671-16   Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
D4672-18   Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
D4673-16   Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
D4703-16   Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
D4745-19   Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods
D4801-08(2016)   Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
D4802-16   Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
D4804-19   Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
D4812-11   Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
D4819-13   Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
D4875-18   Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
D4877-14   Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
D4878-15   Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
D4883-18   Standard Test Method for Density of Polyethylene by the Ultrasound Technique
D4889-15   Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
D4894-19   Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
D4895-18   Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
D4968-19   Standard Practice for Annual Review of Test Methods and Specifications for Plastics
D4969-17   Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
D4976-12a   Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
D4986-18   Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D5017-17   Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
D5023-15   Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
D5024-15   Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
D5025-12e1   Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
D5026-15   Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
D5028-17   Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
D5045-14   Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
D5047-17   Standard Specification for Polyethylene Terephthalate Film and Sheeting
D5048-18   Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
D5071-06(2013)   Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
D5083-17   Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

Doporučujeme:

EviZak - všechny zákony včetně jejich evidence na jednom místě

Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !

Chcete vědět více informací? Podívejte se na tuto stránku.


Tento web používá soubory cookie. Dalším procházením tohoto webu vyjadřujete souhlas s jejich používáním. Více informací / Rozumím