Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 05.05 - Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts
ASTM Volume 05.05 - Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts
Přeložit název
PUBLIKACE vydána dne 1.2.2021
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 05.05 - Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts
Počet stran: 1300
Přibližná hmotnost: 3931 g (8.67 liber)
Datum vydání: 1.2.2021
Země: Americká publikace
Anotace textu normy :
Volume 05.05 also covers test methods to determine characteristics of motor and aviation fuels and the ignition characteristics of diesel fuels. This volume contains all the newest standards from ASTM Committee D02 – including D7974-15, Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromotography. ASTM D7974 is the first standard to identify the protocols necessary to blend mid-level ethanol fuels at the terminal and retail level that equal the fuel quality and performance expected from fuels meeting other ASTM fuel specifications.
Table of Contents
| C559-16(2020) | Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
| C560-20 | Standard Test Methods for Chemical Analysis of Graphite |
| C561-16 | Standard Test Method for Ash in a Graphite Sample |
| C562-15 | Standard Test Method for Moisture in a Graphite Sample |
| C565-15(2021) | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| C611-21 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| C625-15(2021) | Standard Practice for Reporting Irradiation Results on Graphite |
| C651-20 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| C662-16 | Standard Specification for Impervious Graphite Pipe and Threading |
| C695-21 | Standard Test Method for Compressive Strength of Carbon and Graphite |
| C714-17 | Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
| C747-16 | Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
| C748-20 | Standard Test Method for Rockwell Hardness of Graphite Materials |
| C749-15(2020) | Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
| C769-15(2020)e1 | Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Youngs Modulus |
| C781-20 | Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components |
| C783-85(2020) | Standard Practice for Core Sampling of Graphite Electrodes |
| C808-75(2021) | Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| C816-15(2020)e1 | Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method |
| C838-16 | Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes |
| C886-98(2015) | Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials |
| C1025-15(2020) | Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| C1039-85(2020)e1 | Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
| C1179-15 | Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air |
| D613-18ae1 | Standard Test Method for Cetane Number of Diesel Fuel Oil |
| D909-18e1 | Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
| D2699-19e1 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
| D2700-19e1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
| D2885-21 | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
| D6890-21 | Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
| D7219-19 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
| D7223-17 | Standard Specification for Aviation Certification Turbine Fuel |
| D7301-11(2015) | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
| D7542-15 | Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime |
| D7668-17 | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method |
| D7775-16 | Standard Guide for Measurements on Small Graphite Specimens |
| D7779-20 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
| D7846-16 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
| D7972-14(2020) | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
| D8075-16(2021) | Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite |
| D8091-21 | Standard Guide for Impregnation of Graphite with Molten Salt |
| D8093-19 | Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite |
| D8144-18e1 | Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography |
| D8145-18 | Standard Practice for Sampling of Green Petroleum Coke |
| D8146-18 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| D8147-17 | Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines |
| D8148-17 | Standard Test Method for Spectroscopic Determination of Haze in Fuels |
| D8149-20 | Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants |
| D8150-17 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography |
| D8164-21 | Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing |
| D8165-21 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions |
| D8166-21a | Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors |
| D8181-19 | Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils |
| D8182-18 | Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS) |
| D8183-18 | Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method |
| D8184-18e1 | Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument |
| D8185-18 | Standard Guide for In-Service Lubricant Viscosity Measurement |
| D8186-18 | Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES) |
| D8194-18e1 | Standard Practice for Evaluation of Suitability of 37?mm Filter Monitors and 47?mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels |
| D8206-18 | Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT) |
| D8210-20 | Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer |
| D8211-21 | Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface |
| D8226-21a | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine |
| D8227-20 | Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
| D8235-21 | Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| D8236-18 | Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis |
| D8252-19e1 | Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry |
| D8253-21 | Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy Method) |
| D8255-19 | Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens |
| D8256-21 | Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions |
| D8267-19a | Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) |
| D8274-20a | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer |
| D8275-21 | Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines |
| D8276-19 | Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry |
| D8277-20 | Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique |
| D8278-20 | Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants |
| D8279-21 | Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine |
| D8288-19 | Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine |
| D8289-20 | Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite |
| D8290-20 | Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy |
| D8291-21 | Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine |
| D8302-20 | Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography |
| D8304-19 | Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids |
| D8305-19 | Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography |
| D8315-20 | Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry |
| D8316-20a | Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine |
| D8321-21 | Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements |
| D8322-20 | Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES) |
| D8323-20 | Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems |
| D8324-21 | Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit |
| D8325-20 | Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements |
| D8340-20a | Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems |
| D8350-21 | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine |
| D8356-20 | Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio |
| D8368-21 | Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) |
| D8369-21 | Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV) |
| D8377-21a | Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt |
| D8383-21 | Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
| D8386-21 | Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT) |
| E2412-10(2018) | Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
| F118-13 | Standard Definitions of Terms Relating to Gaskets |
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
