Publikace  ASTM Volume 05.04 - Petroleum Products and Lubricants (IV): D6973 - D7755 1.3.2020 náhled

ASTM Volume 05.04 - Petroleum Products and Lubricants (IV): D6973 - D7755

ASTM Volume 05.04 - Petroleum Products and Lubricants (IV): D6973 - D7755

Přeložit název

PUBLIKACE vydána dne 1.3.2020


DostupnostVyprodáno
CenaNA DOTAZ bez DPH
NA DOTAZ

Informace o produktu:

Označení: ASTM Volume 05.04 - Petroleum Products and Lubricants (IV): D6973 - D7755
Počet stran: 1956
Přibližná hmotnost: 5899 g (13.01 liber)
Datum vydání: 1.3.2020
Země: Americká publikace

Anotace textu normy :

These five volumes provide over 750 standards that cover fuels, oils, lubricants, and solvents. They address alternative diesel fuels and diesel fuel blend components, (including biodiesel), ethanol, and ethanol blends. They also feature standards for evaluating the properties of motor, diesel, automotive spark-ignition engine fuel, ethanol, aviation fuels, solvent hexane, and naphtha.Standards cover carbon residue, viscosity, cloud point, density, flash point, and sulfur content. Other subjects include natural and liquefied petroleum, pure light hydrocarbons, crude petroleum, wax and petrolatum, and hydraulic fluids. Also includes standards for evaluating the properties of film lubricants, lubricating greases, lubricating oil, used oils, cutting oils, turbine oils, and engine tests (octane and cetane numbers).


Table of Contents



D6973-14(2019)   Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D6974-20   Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
D6984-18   Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
D6986-03(2020)   Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
D6987/D6987M-13a   Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
D7038-20   Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D7039-15a(2020)   Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7040-04(2020)   Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D7041-16   Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
D7042-20   Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
D7043-17   Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D7044-15   Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
D7058-19   Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
D7059-09(2017)   Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D7060-20   Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
D7061-19e1   Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
D7094-17a   Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
D7095-17   Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
D7096-19   Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
D7097-19   Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
D7098-08(2015)   Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
D7109-20a   Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
D7110-20   Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
D7111-16   Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7112-19   Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
D7152-11(2016)e1   Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
D7153-15e1   Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
D7154-15   Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
D7155-20   Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
D7156-19   Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
D7157-18   Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
D7169-20e1   Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
D7171-20   Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
D7212-13(2018)   Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
D7213-15(2019)   Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100?°C to 615?°C by Gas Chromatography
D7214-20   Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
D7215-16   Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
D7216-20a   Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
D7217-16   Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7220-12(2017)   Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
D7223-17   Standard Specification for Aviation Certification Turbine Fuel
D7224-20   Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
D7235-16   Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
D7236-16a   Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
D7260-20   Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
D7261-17   Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
D7278-16   Standard Guide for Prediction of Analyzer Sample System Lag Times
D7279-18e1   Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
D7280-20   Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
D7303-17   Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
D7317-07(2019)   Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
D7318-19e1   Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
D7319-17   Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
D7320-18   Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
D7321-18a   Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
D7328-17   Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
D7342-20   Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
D7343-20   Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
D7344-17a   Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
D7345-17   Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
D7346-15   Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
D7347-15   Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
D7371-14   Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
D7372-17   Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
D7373-12   Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
D7397-20   Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
D7398-11(2016)   Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100?°C to 615?°C by Gas Chromatography
D7412-18   Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7414-18   Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7415-18   Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7416-09(2020)   Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
D7417-17   Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
D7418-12(2019)   Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
D7419-18   Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
D7420-18   Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7421-19   Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
D7422-19   Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
D7423-17   Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
D7450-19   Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
D7451-20   Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
D7452-19   Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
D7453-18   Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
D7454-19   Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
D7455-19   Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
D7463-18   Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
D7464-20   Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
D7467-20a   Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
D7468-20   Standard Test Method for Cummins ISM Test
D7482-17   Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
D7483-20   Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
D7484-19   Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
D7500-15(2019)   Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100?°C to 735?°C by Gas Chromatography
D7501-18a   Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
D7524-10(2015)   Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
D7525-14(2019)e1   Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
D7527-10(2018)   Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
D7528-17a   Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
D7544-12(2017)   Standard Specification for Pyrolysis Liquid Biofuel
D7545-14(2019)e1   Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
D7546-15   Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
D7547-18a   Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
D7548-16a   Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
D7549-19   Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
D7563-10(2016)   Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
D7566-20a   Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
D7576-16   Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
D7577-12(2016)   Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
D7578-20   Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
D7579-09(2019)   Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
D7589-16   Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
D7590-09(2014)   Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
D7591-12(2017)   Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
D7593-14   Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
D7594-19   Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7603-13   Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
D7618-13(2017)   Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
D7619-17   Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
D7620-10(2020)   Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
D7621-16   Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
D7622-20   Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
D7623-20   Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
D7624-18   Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7646-10(2019)   Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
D7647-10(2018)   Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
D7665-17   Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
D7666-12(2019)   Standard Specification for Triglyceride Burner Fuel
D7667-10(2015)   Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
D7668-17   Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
D7669-15   Standard Guide for Practical Lubricant Condition Data Trend Analysis
D7670-10(2017)   Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
D7671-10(2015)   Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
D7683-20   Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
D7684-11(2016)   Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
D7685-11(2016)   Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
D7686-19   Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
D7687-17   Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
D7688-18   Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
D7689-20   Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
D7690-11(2017)   Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
D7691-16   Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7717-11(2017)   Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
D7718-11(2019)   Standard Practice for Obtaining In-Service Samples of Lubricating Grease
D7719-18   Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
D7720-11(2017)   Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
D7721-17   Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
D7739-11(2016)   Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
D7740-20   Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
D7751-16   Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
D7752-18   Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
D7753-12(2016)   Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
D7754-19   Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
D7755-11(2017)   Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
D7995-19   Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration

Doporučujeme:




Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.