Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 05.02 - Petroleum Products and Lubricants (II): D3711 - D6122
Přeložit název
PUBLIKACE vydána dne 1.3.2018
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 05.02 - Petroleum Products and Lubricants (II): D3711 - D6122
Počet stran: 1938
Přibližná hmotnost: 5845 g (12.89 liber)
Datum vydání: 1.3.2018
Země: Americká publikace
These five volumes provide over 750 standards that cover fuels, oils, lubricants, and solvents. They address alternative diesel fuels and diesel fuel blend components, (including biodiesel), ethanol, and ethanol blends. They also feature standards for evaluating the properties of motor, diesel, automotive spark-ignition engine fuel, ethanol, aviation fuels, solvent hexane, and naphtha.Standards cover carbon residue, viscosity, cloud point, density, flash point, and sulfur content. Other subjects include natural and liquefied petroleum, pure light hydrocarbons, crude petroleum, wax and petrolatum, and hydraulic fluids. Also includes standards for evaluating the properties of film lubricants, lubricating greases, lubricating oil, used oils, cutting oils, turbine oils, and engine tests (octane and cetane numbers).
D3712-05(2017) | Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography |
D3764-15e1 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
D3827-92(2012) | Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids |
D3828-16a | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester |
D3829-17 | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
D3831-12(2017) | Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy |
D3944-12(2017) | Standard Test Method for Solidification Point of Petroleum Wax |
D3948-14(2018) | Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
D4006-16e1 | Standard Test Method for Water in Crude Oil by Distillation |
D4007-11(2016)e1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
D4042-93(2014) | Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
D4045-15 | Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
D4046-14 | Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry |
D4047-13 | Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method |
D4048-16e1 | Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
D4049-16 | Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray |
D4051-10(2015) | Standard Practice for Preparation of Low-Pressure Gas Blends |
D4052-16 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
D4054-16 | Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives |
D4055-04(2013) | Standard Test Method for Pentane Insolubles by Membrane Filtration |
D4056-16 | Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants |
D4057-12(2018) | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
D4072-98(2013) | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
D4170-16 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
D4171-16a | Standard Specification for Fuel System Icing Inhibitors |
D4172-94(2016) | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
D4174-17 | Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems |
D4175-17ae1 | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
D4176-04(2014) | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
D4177-16e1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
D4178-82(2017) | Standard Practice for Calibrating Moisture Analyzers |
D4289-13(2014)e1 | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
D4290-15 | Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions |
D4291-04(2017) | Standard Test Method for Trace Ethylene Glycol in Used Engine Oil |
D4292-17 | Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke |
D4293-15e1 | Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications |
D4294-16e1 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry |
D4296-83(2015)e1 | Standard Practice for Sampling Pitch |
D4304-17 | Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
D4306-15 | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
D4307-17 | Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards |
D4308-13 | Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter |
D4310-10(2015) | Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
D4312-15 | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method) |
D4377-00(2011) | Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration |
D4378-13 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
D4418-17 | Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines |
D4419-90(2015) | Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) |
D4422-13 | Standard Test Method for Ash in Analysis of Petroleum Coke |
D4423-10(2015) | Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons |
D4424-09(2014) | Standard Test Method for Butylene Analysis by Gas Chromatography |
D4425-09(2014) | Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) |
D4485-16 | Standard Specification for Performance of Active API Service Category Engine Oils |
D4486-10 | Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids |
D4529-17 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
D4530-15 | Standard Test Method for Determination of Carbon Residue (Micro Method) |
D4539-17 | Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) |
D4616-95(2013) | Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch |
D4625-16e1 | Standard Test Method for Middle Distillate Fuel Storage Stability at 43?°C (110?°F) |
D4626-95(2015) | Standard Practice for Calculation of Gas Chromatographic Response Factors |
D4627-12(2017) | Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids |
D4628-16 | Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry |
D4629-12(2017) | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
D4636-17 | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
D4682-13 | Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants |
D4683-17 | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C |
D4684-17a | Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature |
D4693-07(2017) | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
D4715-98(2017) | Standard Test Method for Coking Value of Tar and Pitch (Alcan) |
D4737-10(2016) | Standard Test Method for Calculated Cetane Index by Four Variable Equation |
D4739-11(2017) | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
D4740-04(2014) | Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test |
D4741-17 | Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer |
D4742-17 | Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT) |
D4746-14e1 | Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration |
D4806-17 | Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
D4807-05(2015) | Standard Test Method for Sediment in Crude Oil by Membrane Filtration |
D4808-17 | Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy |
D4809-13 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) |
D4814-17 | Standard Specification for Automotive Spark-Ignition Engine Fuel |
D4815-15b | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography |
D4857-12 | Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
D4858-13 | Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines |
D4859-13 | Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC |
D4860-14 | Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) |
D4863-13 | Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants |
D4865-09(2014) | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
D4868-17 | Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels |
D4870-09(2014) | Standard Test Method for Determination of Total Sediment in Residual Fuels |
D4871-11(2016) | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
D4892-14 | Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method) |
D4893-94(2015)e1 | Standard Test Method for Determination of Pitch Volatility |
D4898-16 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
D4927-15 | Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy |
D4928-12(2018) | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
D4929-17 | Standard Test Method for Determination of Organic Chloride Content in Crude Oil |
D4930-06(2017) | Standard Test Method for Dust Control Material on Calcined Petroleum Coke |
D4931-06(2017) | Standard Test Method for Gross Moisture in Green Petroleum Coke |
D4950-14 | Standard Classification and Specification for Automotive Service Greases |
D4951-14 | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
D4952-12(2017) | Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) |
D4953-15 | Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) |
D4998-13 | Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
D5001-10(2014) | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
D5002-16 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
D5003-06a(2017) | Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke |
D5004-11(2017) | Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
D5006-11(2016) | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
D5018-89(2015)e1 | Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches |
D5056-17 | Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
D5059-14 | Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
D5133-15 | Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
D5134-13(2017) | Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography |
D5182-97(2014) | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
D5183-05(2016) | Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine |
D5184-12(2017) | Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
D5185-13e1 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
D5186-15 | Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography |
D5187-10(2015)e1 | Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction |
D5188-16 | Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method) |
D5191-15 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
D5234-92(2017) | Standard Guide for Analysis of Ethylene Product |
D5236-17 | Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
D5273-92(2012) | Standard Guide for Analysis of Propylene Concentrates |
D5274-00(2014) | Standard Guide for Analysis of 1,3–Butadiene Product |
D5275-17 | Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids |
D5291-16 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
D5292-99(2014) | Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
D5293-17a | Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10?°C and –35?°C Using Cold-Cranking Simulator |
D5303-92(2012) | Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography |
D5304-15 | Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure |
D5305-12 | Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor |
D5306-92(2013) | Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
D5372-17 | Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
D5384-14 | Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method) |
D5441-98(2017) | Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
D5442-17 | Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography |
D5443-14(2018) | Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography |
D5452-12 | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
D5453-16e1 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence |
D5481-13 | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
D5482-07(2013) | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) |
D5483-05(2015) | Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
D5500-16 | Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
D5501-12(2016) | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
D5502-00(2015) | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
D5534-94(2011)e1 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
D5579-16 | Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test |
D5580-15 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography |
D5598-01(2012) | Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling |
D5599-17 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection |
D5600-17 | Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
D5621-07(2013) | Standard Test Method for Sonic Shear Stability of Hydraulic Fluids |
D5622-17 | Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis |
D5623-94(2014) | Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection |
D5662-17a | Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers |
D5704-17 | Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles |
D5705-15 | Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils |
D5706-16 | Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
D5707-16 | Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine |
D5708-15 | Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry |
D5709-09(2015) | Standard Test Method for Sieve Analysis of Petroleum Coke |
D5760-13 | Standard Specification for Performance of Manual Transmission Gear Lubricants |
D5761-96(2017) | Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials |
D5762-17 | Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence |
D5763-11(2016) | Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware |
D5769-15 | Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry |
D5770-11(2017) | Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing |
D5771-17 | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method) |
D5772-17 | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method) |
D5773-17e1 | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method) |
D5797-17 | Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines |
D5798-17 | Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines |
D5799-95(2014) | Standard Test Method for Determination of Peroxides in Butadiene |
D5800-15a | Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method |
D5842-17 | Standard Practice for Sampling and Handling of Fuels for Volatility Measurement |
D5845-01(2016) | Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
D5846-07(2017) | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
D5853-17a | Standard Test Method for Pour Point of Crude Oils |
D5854-96(2015) | Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
D5863-00a(2016) | Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
D5864-17 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components |
D5949-16 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
D5950-14 | Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
D5966-13 | Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
D5967-17 | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
D5968-17 | Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?°C |
D5969-11(2016) | Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
D5972-16 | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) |
D5983-17 | Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel |
D5984-11(2017) | Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration |
D5985-02(2014) | Standard Test Method for Pour Point of Petroleum Products (Rotational Method) |
D5986-96(2015) | Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy |
D6006-17 | Standard Guide for Assessing Biodegradability of Hydraulic Fluids |
D6021-12(2017) | Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
D6022-06(2012) | Standard Practice for Calculation of Permanent Shear Stability Index |
D6045-12(2017) | Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method |
D6046-17 | Standard Classification of Hydraulic Fluids for Environmental Impact |
D6074-15 | Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
D6078-04(2016) | Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) |
D6079-11(2016) | Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) |
D6080-12a | Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids |
D6081-98(2014) | Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation |
D6082-12(2017) | Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils |
D6120-97(2017)e1 | Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature |
D6121-17 | Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles |
D6122-15 | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 19.04.2024 (Počet položek: 2 860 954)
© Copyright 2024 NORMSERVIS s.r.o.