Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 05.01 - Petroleum Products and Lubricants (I): D56 - D3348
ASTM Volume 05.01 - Petroleum Products and Lubricants (I): D56 - D3348
Přeložit název
PUBLIKACE vydána dne 1.2.2021
| Dostupnost | Vyprodáno |
| Cena | NA DOTAZ bez DPH |
| NA DOTAZ |
Informace o produktu:
Označení: ASTM Volume 05.01 - Petroleum Products and Lubricants (I): D56 - D3348
Počet stran: 2196
Přibližná hmotnost: 6619 g (14.59 liber)
Datum vydání: 1.2.2021
Země: Americká publikace
Anotace textu normy :
These five volumes provide over 750 standards that cover fuels, oils, lubricants, and solvents. They address alternative diesel fuels and diesel fuel blend components, (including biodiesel), ethanol, and ethanol blends. They also feature standards for evaluating the properties of motor, diesel, automotive spark-ignition engine fuel, ethanol, aviation fuels, solvent hexane, and naphtha.Standards cover carbon residue, viscosity, cloud point, density, flash point, and sulfur content. Other subjects include natural and liquefied petroleum, pure light hydrocarbons, crude petroleum, wax and petrolatum, and hydraulic fluids. Also includes standards for evaluating the properties of film lubricants, lubricating greases, lubricating oil, used oils, cutting oils, turbine oils, and engine tests (octane and cetane numbers).
Table of Contents
| C1234-11(2019) | Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations |
| D56-21 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| D61-15(2019) | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| D71-94(2019) | Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method) |
| D86-20b | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure |
| D87-09(2018) | Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve) |
| D91-02(2019) | Standard Test Method for Precipitation Number of Lubricating Oils |
| D92-18 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| D93-20 | Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| D94-07(2017) | Standard Test Methods for Saponification Number of Petroleum Products |
| D95-13(2018) | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
| D97-17b | Standard Test Method for Pour Point of Petroleum Products |
| D127-19 | Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum |
| D128-98(2019) | Standard Test Methods for Analysis of Lubricating Grease |
| D129-18 | Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) |
| D130-19 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
| D156-15 | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| D187-18 | Standard Test Method for Burning Quality of Kerosene |
| D189-06(2019) | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
| D217-21 | Standard Test Methods for Cone Penetration of Lubricating Grease |
| D240-19 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| D287-12b(2019) | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| D322-97(2016) | Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation |
| D323-20a | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
| D341-20e1 | Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products |
| D381-19 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| D396-21 | Standard Specification for Fuel Oils |
| D445-21 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| D446-12(2017) | Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers |
| D473-07(2017)e1 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| D482-19 | Standard Test Method for Ash from Petroleum Products |
| D483-04(2018) | Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils |
| D524-15(2019) | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| D525-12a(2019) | Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) |
| D565-99(2019) | Standard Test Method for Carbonizable Substances in White Mineral Oil |
| D566-20 | Standard Test Method for Dropping Point of Lubricating Grease |
| D611-12(2016) | Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents |
| D612-88(2017) | Standard Test Method for Carbonizable Substances in Paraffin Wax |
| D664-18e2 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
| D665-19 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
| D721-17 | Standard Test Method for Oil Content of Petroleum Waxes |
| D808-16 | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| D873-12(2018) | Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) |
| D874-13a(2018) | Standard Test Method for Sulfated Ash from Lubricating Oils and Additives |
| D892-18 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
| D893-14(2018) | Standard Test Method for Insolubles in Used Lubricating Oils |
| D910-21 | Standard Specification for Leaded Aviation Gasolines |
| D937-07(2019) | Standard Test Method for Cone Penetration of Petrolatum |
| D938-12(2017) | Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum |
| D942-19 | Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method |
| D943-20 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
| D972-16 | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| D974-21 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
| D975-20c | Standard Specification for Diesel Fuel |
| D976-06(2016) | Standard Test Method for Calculated Cetane Index of Distillate Fuels |
| D1018-11(2016) | Standard Test Method for Hydrogen In Petroleum Fractions |
| D1025-10(2021) | Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene |
| D1091-11(2016) | Standard Test Methods for Phosphorus in Lubricating Oils and Additives |
| D1092-20 | Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases |
| D1093-11(2017) | Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
| D1094-07(2019) | Standard Test Method for Water Reaction of Aviation Fuels |
| D1157-91(2019) | Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| D1159-07(2017) | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| D1160-18 | Standard Test Method for Distillation of Petroleum Products at Reduced Pressure |
| D1217-20 | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
| D1218-12(2016) | Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids |
| D1250-19e1 | Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1 |
| D1264-18e1 | Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases |
| D1265-11(2017)e1 | Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method |
| D1266-18 | Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
| D1267-18 | Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) |
| D1298-12b(2017) | Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
| D1318-16 | Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) |
| D1319-20a | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption |
| D1321-16a | Standard Test Method for Needle Penetration of Petroleum Waxes |
| D1322-19 | Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel |
| D1401-19 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| D1403-20b | Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
| D1404/D1404M-99(2019) | Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease |
| D1465-10(2021) | Standard Test Method for Blocking and Picking Points of Petroleum Wax |
| D1478-20 | Standard Test Method for Low-Temperature Torque of Ball Bearing Grease |
| D1480-21 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer |
| D1481-17 | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer |
| D1500-12(2017) | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| D1550-18 | Standard ASTM Butadiene Measurement Tables |
| D1552-16(2021) | Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD) |
| D1655-21a | Standard Specification for Aviation Turbine Fuels |
| D1657-12(2017) | Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer |
| D1662-19 | Standard Test Method for Active Sulfur in Cutting Oils |
| D1742-20 | Standard Test Method for Oil Separation from Lubricating Grease During Storage |
| D1743-21 | Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases |
| D1747-09(2019) | Standard Test Method for Refractive Index of Viscous Materials |
| D1748-10(2015) | Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet |
| D1796-11(2016) | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) |
| D1831-20 | Standard Test Method for Roll Stability of Lubricating Grease |
| D1833-87(2017) | Standard Test Method for Odor of Petroleum Wax |
| D1835-20 | Standard Specification for Liquefied Petroleum (LP) Gases |
| D1838-21 | Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases |
| D1840-07(2017) | Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
| D2001-07(2017) | Standard Test Method for Depentanization of Gasoline and Naphthas |
| D2007-19 | Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| D2008-12(2018) | Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products |
| D2068-20 | Standard Test Method for Determining Filter Blocking Tendency |
| D2070-16e1 | Standard Test Method for Thermal Stability of Hydraulic Oils |
| D2155-18 | Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature |
| D2156-09(2018) | Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels |
| D2157-18 | Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels |
| D2158-21 | Standard Test Method for Residues in Liquefied Petroleum (LP) Gases |
| D2161-20 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| D2162-21 | Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards |
| D2163-14(2019) | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
| D2265-20 | Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range |
| D2266-01(2015) | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| D2268-93(2017) | Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography |
| D2269-10(2020) | Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption |
| D2270-10(2016) | Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40?°C and 100?°C |
| D2272-14a | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| D2273-08(2016) | Standard Test Method for Trace Sediment in Lubricating Oils |
| D2274-14(2019) | Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
| D2276-06(2014) | Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling |
| D2318-20 | Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch |
| D2319/D2319M-20 | Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) |
| D2320-98(2017) | Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method) |
| D2384-19 | Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| D2386-19 | Standard Test Method for Freezing Point of Aviation Fuels |
| D2392-15(2021) | Standard Test Method for Color of Dyed Aviation Gasolines |
| D2415-20 | Standard Test Method for Ash in Coal Tar and Pitch |
| D2416-20 | Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson) |
| D2420-13(2018) | Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) |
| D2421-21e1 | Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis |
| D2422-97(2018) | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| D2423-90(2017) | Standard Test Method for Surface Wax on Waxed Paper or Paperboard |
| D2425-21 | Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry |
| D2426-19 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| D2427-06(2019) | Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography |
| D2500-17a | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels |
| D2501-14(2019) | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| D2502-14(2019)e1 | Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements |
| D2503-92(2016) | Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure |
| D2504-88(2015) | Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography |
| D2505-88(2015) | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography |
| D2509-20ae1 | Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) |
| D2510-94(2017) | Standard Test Method for Adhesion of Solid Film Lubricants |
| D2511-20 | Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants |
| D2532-17 | Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants |
| D2534-88(2017) | Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings |
| D2549-02(2017) | Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography |
| D2593-19 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
| D2595-17 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
| D2596-20 | Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) |
| D2598-21 | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
| D2603-20 | Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils |
| D2619-21 | Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method) |
| D2622-16 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| D2624-21 | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| D2625-20 | Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
| D2638-21 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| D2649-20a | Standard Test Method for Corrosion Characteristics of Solid Film Lubricants |
| D2650-10(2021) | Standard Test Method for Chemical Composition of Gases by Mass Spectrometry |
| D2669-16 | Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) |
| D2670-20 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| D2709-16 | Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge |
| D2710-20 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| D2711-17 | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| D2712-20 | Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography |
| D2713-20 | Standard Test Method for Dryness of Propane (Valve Freeze Method) |
| D2714-94(2019) | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| D2764-20 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch |
| D2782-20 | Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method) |
| D2783-19 | Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method) |
| D2786-91(2016) | Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry |
| D2789-95(2016) | Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry |
| D2878-10(2016) | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| D2879-18 | Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope |
| D2880-20 | Standard Specification for Gas Turbine Fuel Oils |
| D2881-19 | Standard Classification for Metalworking Fluids and Related Materials |
| D2887-19ae2 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography |
| D2889-95(2019) | Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels |
| D2890-92(2018) | Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels |
| D2892-20 | Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) |
| D2893-19 | Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
| D2896-15 | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| D2962-10(2019) | Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches |
| D2981-94(2019) | Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion |
| D2982-07(2019) | Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils |
| D2983-20 | Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer |
| D3104-14a(2018) | Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method) |
| D3120-08(2019) | Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry |
| D3227-16 | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| D3228-20 | Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
| D3230-19 | Standard Test Method for Salts in Crude Oil (Electrometric Method) |
| D3231-18 | Standard Test Method for Phosphorus in Gasoline |
| D3233-19 | Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods) |
| D3235-16e1 | Standard Test Method for Solvent Extractables in Petroleum Waxes |
| D3236-15(2021) | Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
| D3237-17 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| D3238-17a | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
| D3239-91(2016) | Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry |
| D3240-15 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| D3241-20c | Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels |
| D3242-11(2017) | Standard Test Method for Acidity in Aviation Turbine Fuel |
| D3244-21 | Standard Practice for Utilization of Test Data to Determine Conformance with Specifications |
| D3246-15 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| D3336-20b | Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures |
| D3338/D3338M-20a | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| D3339-12(2017) | Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration |
| D3341-16 | Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
| D3342-90(2017) | Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water |
| D3343-16 | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| D3344-90(2021) | Standard Test Method for Total Wax Content of Corrugated Paperboard |
| D3348-12(2017) | Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) |
| D3427-19 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
| D3461-18 | Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method) |
| D3521-86(2017) | Standard Test Method for Surface Wax Coating On Corrugated Board |
| D3524-14(2020) | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| D3525-20 | Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography |
| D3527-18 | Standard Test Method for Life Performance of Automotive Wheel Bearing Grease |
| D3603-20 | Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| D3605-17 | Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy |
| D3606-20e1 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography |
| D3607-08(2016) | Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping |
| D3699-19 | Standard Specification for Kerosine |
| D3700-16 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| D3701-17 | Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| D3702-94(2019) | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| D3703-18 | Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels |
| D3704-96(2017) | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| D3705-14(2019) | Standard Test Method for Misting Properties of Lubricating Fluids |
| D3712-18 | Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography |
| D3764-19 | Standard Practice for Validation of the Performance of Process Stream Analyzer Systems |
| D3828-16a(2021) | Standard Test Methods for Flash Point by Small Scale Closed Cup Tester |
| D3829-20a | Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil |
| D3831-12(2017) | Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy |
| D3944-12(2017) | Standard Test Method for Solidification Point of Petroleum Wax |
| D3948-20 | Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
| D4006-16e1 | Standard Test Method for Water in Crude Oil by Distillation |
| D4007-11(2016)e1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
| D4042-93(2019) | Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils |
| D4045-19 | Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry |
| D4047-18 | Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method |
| D4048-19a | Standard Test Method for Detection of Copper Corrosion from Lubricating Grease |
| D4049-20 | Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray |
| D4051-10(2021) | Standard Practice for Preparation of Low-Pressure Gas Blends |
| D4052-18a | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| D4054-21 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| D4055-04(2019) | Standard Test Method for Pentane Insolubles by Membrane Filtration |
| D4056-16 | Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants |
| D4057-19 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| D4072-98(2018) | Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch |
| D4170-16 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| D4171-21 | Standard Specification for Fuel System Icing Inhibitors |
| D4172-20 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| D4174-17 | Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems |
| D4175-20b | Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants |
| D4176-21a | Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
Doporučujeme:
