Publikace  ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography 1.7.2020 náhled

ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography

ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography

Přeložit název

PUBLIKACE vydána dne 1.7.2020


DostupnostVyprodáno
CenaNA DOTAZ bez DPH
NA DOTAZ

Informace o produktu:

Označení: ASTM Volume 03.01 - Metals - Mechanical Testing; Elevated and Low - Temperature Tests; Metallography
Počet stran: 1816
Přibližná hmotnost: 5479 g (12.08 liber)
Datum vydání: 1.7.2020
Země: Americká publikace

Anotace textu normy :

Volume 03.01 covers tests and practices for mechanical testing procedures, including: machine calibration, bend and flexure testing, compression, ductility, formability, elastic properties, impact, linear thermal expansion, shear, torsion, residual stress, tension testing, structural films for MEMS, and electronic applications. Other standards cover fatigue and fracture testing of materials, including crack tip opening displacement (CTOD), fracture toughness measurement, and linear elastic plane-strain fracture toughness of metallic materials. Also featured are metallography tests and practices that define standard optical, electron, and X-ray procedures for determining the constituents and structure of metals and alloys.


Table of Contents



E3-11(2017)   Standard Guide for Preparation of Metallographic Specimens
E4-20   Standard Practices for Force Verification of Testing Machines
E6-15e3   Standard Terminology Relating to Methods of Mechanical Testing
E7-17   Standard Terminology Relating to Metallography
E8/E8M-16ae1   Standard Test Methods for Tension Testing of Metallic Materials
E9-19   Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
E10-18   Standard Test Method for Brinell Hardness of Metallic Materials
E18-20   Standard Test Methods for Rockwell Hardness of Metallic Materials
E21-17e1   Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E23-18   Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E45-18a   Standard Test Methods for Determining the Inclusion Content of Steel
E74-18e1   Standard Practices for Calibration and Verification for Force-Measuring Instruments
E81-96(2017)   Standard Test Method for Preparing Quantitative Pole Figures
E82/E82M-14(2019)   Standard Test Method for Determining the Orientation of a Metal Crystal
E83-16   Standard Practice for Verification and Classification of Extensometer Systems
E92-17   Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
E103-17   Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
E110-14   Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
E111-17   Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
E112-13   Standard Test Methods for Determining Average Grain Size
E132-17   Standard Test Method for Poisson’s Ratio at Room Temperature
E139-11(2018)   Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E140-12B(2019)e1   Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
E143-13   Standard Test Method for Shear Modulus at Room Temperature
E190-14   Standard Test Method for Guided Bend Test for Ductility of Welds
E208-20   Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E209-18   Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
E238-17a   Standard Test Method for Pin-Type Bearing Test of Metallic Materials
E251-20a   Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
E290-14   Standard Test Methods for Bend Testing of Material for Ductility
E292-18   Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E328-13   Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E340-15   Standard Practice for Macroetching Metals and Alloys
E345-16   Standard Test Methods of Tension Testing of Metallic Foil
E381-20   Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E384-17   Standard Test Method for Microindentation Hardness of Materials
E399-20   Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
E407-07(2015)e1   Standard Practice for Microetching Metals and Alloys
E436-03(2014)   Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
E466-15   Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E467-08(2014)   Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E468-18   Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E517-19   Standard Test Method for Plastic Strain Ratio r for Sheet Metal
E561-20   Standard Test Method for KR Curve Determination
E562-19e1   Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
E604-18   Standard Test Method for Dynamic Tear Testing of Metallic Materials
E606/E606M-19e1   Standard Test Method for Strain-Controlled Fatigue Testing
E633-13   Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E643-15   Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
E646-16   Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials
E647-15e1   Standard Test Method for Measurement of Fatigue Crack Growth Rates
E739-10(2015)   Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (?-N) Fatigue Data
E740/E740M-03(2016)   Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
E766-14(2019)   Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
E768-99(2018)   Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
E837-13a   Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E855-08(2013)   Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E883-11(2017)   Standard Guide for Reflected–Light Photomicrography
E915-19   Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E930-18   Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E975-13   Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
E986-04(2017)   Standard Practice for Scanning Electron Microscope Beam Size Characterization
E1012-19   Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
E1049-85(2017)   Standard Practices for Cycle Counting in Fatigue Analysis
E1077-14   Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E1180-08(2014)   Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181-02(2015)   Standard Test Methods for Characterizing Duplex Grain Sizes
E1221-12A(2018)e1   Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
E1237-93(2014)   Standard Guide for Installing Bonded Resistance Strain Gages
E1245-03(2016)   Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E1268-19   Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
E1304-97(2020)   Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1319-98(2014)   Standard Guide for High-Temperature Static Strain Measurement
E1351-01(2012)   Standard Practice for Production and Evaluation of Field Metallographic Replicas
E1382-97(2015)   Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E1426-14(2019)e1   Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
E1450-16   Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1457-19e1   Standard Test Method for Measurement of Creep Crack Growth Times in Metals
E1508-12a(2019)   Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
E1558-09(2014)   Standard Guide for Electrolytic Polishing of Metallographic Specimens
E1561-93(2014)   Standard Practice for Analysis of Strain Gage Rosette Data
E1681-03(2013)e1   Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1685-13   Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
E1820-20ae1   Standard Test Method for Measurement of Fracture Toughness
E1823-20a   Standard Terminology Relating to Fatigue and Fracture Testing
E1856-13   Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
E1875-20   Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Sonic Resonance
E1876-15   Standard Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Impulse Excitation of Vibration
E1920-03(2014)   Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings
E1921-20   Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
E1928-13(2019)   Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
E1942-98(2018)e1   Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
E1949-03(2014)e1   Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
E1951-14(2019)   Standard Guide for Calibrating Reticles and Light Microscope Magnifications
E2014-17   Standard Guide on Metallographic Laboratory Safety
E2015-04(2014)   Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
E2109-01(2014)   Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E2142-08(2015)   Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2207-15   Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2208-02(2018)e1   Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
E2218-15   Standard Test Method for Determining Forming Limit Curves
E2244-11(2018)   Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2245-11(2018)   Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2246-11(2018)   Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2248-18   Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
E2283-08(2019)   Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2298-18   Standard Test Method for Instrumented Impact Testing of Metallic Materials
E2309/E2309M-20   Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
E2368-10(2017)   Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
E2428-15a   Standard Practice for Calibration and Verification of Torque Transducers
E2443-05(2018)e1   Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
E2444-11(2018)   Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films
E2448-18   Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
E2472-12(2018)e1   Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
E2546-15   Standard Practice for Instrumented Indentation Testing
E2567-16a   Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
E2624-17   Standard Practice for Torque Calibration of Testing Machines
E2627-13(2019)   Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
E2658-15   Standard Practices for Verification of Speed for Material Testing Machines
E2712-15   Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet
E2714-13(2020)   Standard Test Method for Creep-Fatigue Testing
E2760-19e1   Standard Test Method for Creep-Fatigue Crack Growth Testing
E2789-10(2015)   Standard Guide for Fretting Fatigue Testing
E2818-11(2019)   Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
E2860-12   Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
E2899-19e1   Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
E2948-16a   Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
E3039-18e1   Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT-Type Specimens
E3076-18   Standard Practice for Determination of the Slope in the Linear Region of a Test Record
E3097-17   Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
E3098-17   Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys

Doporučujeme:




Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.