Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM Volume 01.09 - Fasteners; Rolling Element Bearings
Přeložit název
PUBLIKACE vydána dne 1.1.2021
Dostupnost | Vyprodáno |
Cena | NA DOTAZ bez DPH |
NA DOTAZ |
Označení: ASTM Volume 01.09 - Fasteners; Rolling Element Bearings
Počet stran: 980
Přibližná hmotnost: 2971 g (6.55 liber)
Datum vydání: 1.1.2021
Země: Americká publikace
This volume covers specifications for internally and externally threaded fasteners, and non-threaded driven fasteners. Also included are standards on rolling element bearings, establishing properties for bearings used in automotive and aerospace applications.
A31-14(2020) | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
A307-21 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength |
A354-17e2 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
A394-08(2015) | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
A449-14(2020) | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
A489-18e1 | Standard Specification for Carbon Steel Eyebolts |
A502-03(2015) | Standard Specification for Rivets, Steel, Structural |
A563/A563M-21a | Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric) |
A574-17 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
F432-19 | Standard Specification for Roof and Rock Bolts and Accessories |
F436/F436M-19 | Standard Specification for Hardened Steel Washers Inch and Metric Dimensions |
F467-13(2018) | Standard Specification for Nonferrous Nuts for General Use |
F467M-06a(2018) | Standard Specification for Nonferrous Nuts for General Use (Metric) |
F468-16 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
F468M-06(2018) | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
F541-12(2020) | Standard Specification for Alloy Steel Eyebolts |
F547-17 | Standard Terminology of Nails for Use with Wood and Wood-Base Materials |
F593-17 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
F594-09(2020) | Standard Specification for Stainless Steel Nuts |
F606/F606M-21 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
F680-20 | Standard Test Methods for Nails |
F788-20 | Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series |
F812-12(2017) | Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series |
F835-20 | Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws |
F836M-20 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
F837-20 | Standard Specification for Stainless Steel Socket Head Cap Screws |
F837M-20 | Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
F844-19 | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
F879M-16 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) |
F879-15(2020) | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
F880M-16 | Standard Specification for Stainless Steel Socket Set Screws (Metric) |
F880-12(2017) | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
F901-20 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
F912-11(2017) | Standard Specification for Alloy Steel Socket Set Screws |
F959/F959M-17a | Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series |
F1136/F1136M-11(2019) | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
F1137/F1137M-19 | Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners |
F1428-92(2017) | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
F1470-19 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
F1554-20 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
F1575-17 | Standard Test Method for Determining Bending Yield Moment of Nails |
F1667-21 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
F1789-17a | Standard Terminology for F16 Mechanical Fasteners |
F1940-07a(2019) | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
F1941/F1941M-16 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
F2094/F2094M-18a | Standard Specification for Silicon Nitride Bearing Balls |
F2161-21 | Standard Guide for Instrument and Precision Bearing Lubricants—Part 1 Oils |
F2162-01(2016) | Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type |
F2163-01(2016) | Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring |
F2215-15 | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications |
F2246-06(2013) | Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage |
F2281-04(2017) | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
F2282-18 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
F2328-17 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
F2328M-17 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) |
F2329/F2329M-15 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
F2332-06(2013) | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
F2430-04(2018) | Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race) |
F2431-04(2018) | Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring |
F2437/F2437M-17 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
F2443-04(2021) | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
F2444-04(2018) | Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques |
F2482-08(2015) | Standard Specification for Load-Indicating Externally Threaded Fasteners |
F2488-05(2013) | Standard Terminology for Rolling Element Bearings |
F2489-06(2013) | Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases |
F2511-05(2013) | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
F2590-06(2013) | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
F2591-06(2013) | Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) |
F2660-20 | Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement |
F2661-07(2015) | Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer |
F2730/F2730M-18a | Standard Specification for Silicon Nitride Cylindrical Bearing Rollers |
F2832-11(2016) | Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
F2833-11(2017) | Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
F2882/F2882M-17 | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) |
F2953-12(2021) | Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages |
F3019/F3019M-19 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
F3042-13(2018) | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
F3043-15 | Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
F3111-16 | Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
F3125/F3125M-19e2 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
F3131-14 | Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages |
F3148-17a | Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions |
F3329-18 | Standard Specification for Carbon and Alloy Steel Metric Rivets |
F3359-19 | Standard Test Method for Determining Bending Yield Moment of Staples |
F3393-20e1 | Zinc-Flake Coating Systems for Fasteners |
F3394/F3394M-20 | Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 18.04.2024 (Počet položek: 2 859 866)
© Copyright 2024 NORMSERVIS s.r.o.