ASTM G195-13 - 1.7.2013
 
Significance and Use

5.1 This test guide provides a means to quantify the abrasion resistance of material surfaces, and may be related to end-use performance, or used to comparatively rank material performance, or both. The resistance of material surfaces to abrasion, as measured on a testing machine in the laboratory, is generally only one of several factors contributing to wear performance as experienced in the actual use of the material. Other factors may need to be considered in any calculation of predicted life from specific abrasion data.

5.2 The resistance of material surfaces to abrasion may be affected by factors including test conditions; type of abradant; pressure between the specimen and abradant; mounting or tension of the specimen; and type, kind, or amount of finishing materials.

5.3 Abrasion tests utilizing the rotary platform abraser may be subject to variation due to changes in the abradant during the course of specific tests. Depending on abradant type and test specimen, the abrading wheel surface may change (i.e. become clogged) due to the pick-up of finishing or other materials from test specimens. To reduce this variation, the abrading wheels should be resurfaced at regularly defined intervals. See Appendix X2.

5.4 The measurement of the relative amount of abrasion may be affected by the method of evaluation and influenced by the judgment of the operator.

 
1. Scope

1.1 This guide covers and is intended to assist in establishing procedures for conducting wear tests of rigid or flexible materials utilizing the rotary platform abraser.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.2.1 Exception—Inch-pound units are used when stating rotational speed and determining coating thickness.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D3730-17(2022)

Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

D3884-22

Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform Abrader Method)

D4060-19

Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4685-07

Standard Test Method for Pile Fabric Abrasion

D4712-87a(2001)

Standard Guide for Testing Industrial Water-Reducible Coatings

C501-21

Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

D5034-21

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

D5035-11(2019)

Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

D5144-08(2021)

Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

D5146-10(2019)

Standard Guide to Testing Solvent-Borne Architectural Coatings

D5324-16(2022)

Standard Guide for Testing Water-Borne Architectural Coatings

C1353-09

Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

D6037-21

Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

D7255-22e1

Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) (Includes all amendments and changes 11/30/2022).

F362-91(2000)e1

Standard Test Method for Determining the Erasability of Inked Ribbons

F510-93(1999)

Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method

F1344-21a

Standard Specification for Rubber Floor Tile (Includes all amendments and changes 10/29/2021).

F1478-17

Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) (Withdrawn 2020)

F1978-22

Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

D3389-21

Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

D3451-06(2017)

Standard Guide for Testing Coating Powders and Powder Coatings

G40-22a

Standard Terminology Relating to Wear and Erosion (Includes all amendments and changes 11/11/2022).

D1044-19

Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser