ASTM C125-21a - 1.10.2021
 
1. Scope

1.1?This standard is a compilation of definitions of terms as they are used in standards under the jurisdiction of Committee C09.

1.2?Other terminology under the jurisdiction of Committee C09 is included in two specialized standards. Terms relating to constituents of concrete aggregates are defined in Descriptive Nomenclature C294. Terms relating to constituents of aggregates for radiation-shielding concrete are defined in Descriptive Nomenclature C638.

1.3?Related terminology for hydraulic cement is included in Terminology C219. In the event of conflict between definitions in Terminology C125 and definitions in Terminology C219, definitions in Terminology C125 shall govern for Committee C09 standards.

1.4?When a term is used in an ASTM standard for which Committee C09 is responsible, it is included herein only if used in more than one Committee C09 standard.

Note 1:?The subcommittee responsible for this standard will review definitions on a five-year basis to determine if the definition is still appropriate as stated. Revisions will be made when determined necessary. The year shown in parentheses at the end of a definition indicates the year the definition or revision to the definition was approved. A letter R and a year indicate when the definition was reviewed. No date indicates the term has not yet been reviewed.

1.5?This terminology includes notes and discussions to definitions that provide supplementary or explanatory information. These notes and discussions shall not be considered as requirements of this standard nor as parts of the definitions.

1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 
2. Referenced Documents

C1437-20

Standard Test Method for Flow of Hydraulic Cement Mortar

C1240-20

Standard Specification for Silica Fume Used in Cementitious Mixtures

C1610/C1610M-21

Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

C1611/C1611M-21

Standard Test Method for Slump Flow of Self-Consolidating Concrete

C939-10

Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C1074-19e1

Standard Practice for Estimating Concrete Strength by the Maturity Method (Includes all amendments and changes 1/7/2021).

E135-23a

Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).

C294-19

Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

C403/C403M-23

Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C494/C494M-19e1

Standard Specification for Chemical Admixtures for Concrete (Includes all amendments and changes 8/11/2022).

C511-21

Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C638-20

Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

C94/C94M-24

Standard Specification for Ready-Mixed Concrete

C143/C143M-20

Standard Test Method for Slump of Hydraulic-Cement Concrete

C219-20a

Standard Terminology Relating to Hydraulic and Other Inorganic Cements (Includes all amendments and changes 8/28/2020).

C1077-24

Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation