Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
Přeložit název
NORMA vydána dne 15.2.2017
Označení normy: ASTM F1057-17
Poznámka: NEPLATNÁ
Datum vydání normy: 15.2.2017
Kód zboží: NS-680954
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
heat reversion, PVC pipe ,, ICS Number Code 23.040.20 (Plastic pipes)
Significance and Use |
2.1 This practice is applicable to distinguish between properly and improperly extruded PVC plastic pipe. It can be used to: 2.1.1 Reveal incomplete exsiccation of compound before or during extrusion (Note 1), 2.1.2 Determine the presence of stress in the pipe wall produced by the extrusion process (Note 2), 2.1.3 Determine whether unfused areas are present, and 2.1.4 Reveal contamination. Note 1: Residual moisture in the compound vaporizes at
extrusion temperatures and is normally evacuated as it forms vapor.
Pockets of moisture trapped in the pipe wall result from incomplete
exsiccation of the compound, and may reduce the physical properties
of the pipe.
Note 2: Minor residual stress in the pipe will not impair
field performance and handleability. High-residual stress has no
proven effect on performance, but may impair handleability during
installation.
|
1. Scope |
1.1 This practice covers a procedure for estimating the quality of extruded poly (vinyl chloride) (PVC) plastic pipes by observing the reaction of pipe specimens after exposure to hot air in the oven at 180 ± 5°C for 30 min duration. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 25.03.2024 (Počet položek: 2 885 931)
© Copyright 2024 NORMSERVIS s.r.o.