Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (Includes all amendments And changes 4/23/2020).
Automaticky přeložený název:
Standardní zkušební metoda pro korozi ocelových stříkaným hasební odporového materiálu ( SFRM ) aplikované do konstrukčních prvků
NORMA vydána dne 1.8.2015
Označení normy: ASTM E937/E937M-93(2015)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2015
Kód zboží: NS-613248
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
corrosion, sprayed fire-resistive materials,, ICS Number Code 13.220.50 (Fire-resistance of building materials and elements)
Significance and Use | ||||||
5.1 It is the intent of this test method to determine relative corrosive properties of direct applied SFRM that provides an indication of serviceability. Satisfactory performance of SFRM applied to structural members and assemblies depends upon its ability to withstand the various influences that occur during the life of the structure, as well as upon its satisfactory performance under fire conditions. 5.2 This test method evaluates the relative corrosion of steel induced by SFRM and determines whether the presence of SFRM increases, decreases, or has no effect on the corrosion characteristics of steel. |
||||||
1. Scope | ||||||
1.1 This test method covers a procedure for measuring the corrosion to steel induced by sprayed fire-resistive material. 1.2 These SFRMs include sprayed fibrous and cementitious materials applied directly in contact with the structural members. 1.3 This test method is applicable only to laboratory procedures. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.10.2014
Historická
1.5.2010
Historická
1.9.2008
Historická
1.11.2013
Historická
15.11.2011
Historická
15.1.2010
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 17.04.2024 (Počet položek: 2 859 866)
© Copyright 2024 NORMSERVIS s.r.o.