Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B775/B775M-16 1.5.2016 náhled

Doplňující informace

ASTM B775/B775M-16

Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

Přeložit název

NORMA vydána dne 1.5.2016

Jazyk
Provedení	PDF - okamžité stažení - 1 759.00 Kč Tištěné - 1 759.00 Kč
Dostupnost	SKLADEM
Cena	1 759.00 Kč bez DPH
1 759.00 Kč

Informace o normě:

Označení normy: ASTM B775/B775M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2016
Kód zboží: NS-641063
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z niklu a chrómu

Anotace textu normy ASTM B775/B775M-16 :

Keywords:
welded pipe,, ICS Number Code 77.150.40 (Nickel and chromium products)

Doplňující informace

1. Scope

1.1 This specification contains various requirements that, with the exception of Section 5 and Section 10, are mandatory requirements to the following ASTM nickel and nickel alloy, longitudinally welded piping specifications:

Title of Specification

ASTM
Designation

Welded UNS N08020 Alloy Pipe

B464/B464M

Welded Nickel-Iron-Chromium Alloy Pipe

B514

Welded Nickel-Chromium-Iron-Alloy (UNS N06600,
UNS N06603, UNS N06025 and UNS N06045) Pipe

B517

Welded Nickel and Nickel-Cobalt Alloy Pipe

B619/B619M

UNS N08904, UNS N08925, and UNS N08926 Welded Pipe

B673

UNS N08367 Welded Pipe

B675

Nickel-Alloy (UNS N06625, N06219, and N08825) Welded Pipe

B705

Ni-Cr-Mo-Co-W-Fe-Si Alloy (UNS N06333) Welded Pipe

B723

Welded Nickel (UNS N02200/UNS N02201) and Nickel
Copper Alloy (UNS N04400) Pipe

B725

1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.

1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
B619/B619M-19(2023)	Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
B517-19	Standard Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
B673-21	Standard Specification for Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe
B675-22	Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy Welded Pipe
B705-17	Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
B723-20	Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
B725-22	Standard Specification for Welded Nickel and Nickel Copper Alloy Pipe
B880-14(2019)	Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
B899-21	Standard Terminology Relating to Non-ferrous Metals and Alloys
E8-04	Standard Test Methods for Tension Testing of Metallic Materials
B168-19e1	Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip (Includes all amendments and changes 10/20/2022).
B464/B464M-15(2020)	Standard Specification for Welded UNS N08020 Alloy Pipe
B514-05(2019)	Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
E76-88(1998)	Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E39-84 (1990)	Methods for Chemical Analysis of Nickel (Withdrawn 1995)
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E571-19	Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
B36.19	Stainless Steel Pipe
SAE J 1086	Practice for Numbering Metals and Alloys (UNS)
E1473-22	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
B1.20.1	Pipe Threads

E426-16(2021)	Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.

ASTM B775/B775M-16

Informace o normě:

Kategorie - podobné normy:

Anotace textu normy ASTM B775/B775M-16 :

Doplňující informace

Doporučujeme:

Aktualizace zákonů