ASTM B161-05(2009)..
ASTM B163-11e1
ASTM B164-03(2008)..
ASTM B166-11
ASTM B167-11
ASTM B168-11
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B335-03(2013)
Standard Specification for Nickel-Molybdenum Alloy Rod
Automaticky přeložený název:
Standardní specifikace pro nikl-molybden Rod
NORMA vydána dne 1.2.2013
Informace o normě:
Označení normy: ASTM B335-03(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2013
Kód zboží: NS-6278
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM B335-03(2013) :
Keywords:
rod, N10001, N10624, N10629, N10665, N10675, ICS Number Code 77.150.40 (Nickel and chromium products)
Doplňující informace
| 1. Scope | |||||
|
1.1 This specification2 covers rod of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Element |
Composition Limits, % |
|
|||
|
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
|
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
|
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
|
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
|
Carbon, |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
|
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
|
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
|
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
|
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
|
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
|
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
|
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
|
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
|
Columbium |
... |
... |
0.20 |
|
... |
|
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
|
Tantalum, |
... |
... |
0.20 |
|
... |
|
Titanium, |
... |
... |
0.20 |
|
... |
|
Tungsten, |
... |
... |
3.0 |
|
... |
|
Zirconium, |
... |
... |
0.10 |
|
... |
|
Magnesium, |
... |
... |
... |
... |
... |
1.2 The following products are
covered under this specification:
1.2.1 Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot or cold finished, solution annealed and pickled or mechanically descaled.
1.2.2 Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot or cold finished, solution annealed, ground or turned.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
|
|
Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
Podobné normy:
Historická
1.10.2009
Historická
1.10.2011
Historická
1.3.2008
Historická
1.10.2011
Historická
1.10.2011
Historická
1.10.2011
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
